Antique Amber & Blush Bloom

Elevate your space with a soft vintage flourish. Antique Amber & Blush Bloom blends warm amber tones with blush botanicals to create a timeless, welcoming backdrop for bedrooms, nurseries, living rooms, and entryways. Designed for easy refreshes and mindful homes, this removable wallpaper brings character without commitment.

Key Features

• Removable wallpaper designed for home decor and rentals
• PVC-free material printed with eco-friendly, water-based inks
• Each roll/panel is 24 inches wide and available in heights up to 120 inches
• Matte, low-glare finish for a refined, painterly look
• Made to order to minimize waste and ensure fresh, vibrant color
• Best on smooth, sealed walls; easy to remove without typical wall damage

What’s Included

• Printed wallpaper panels at your selected height (24 inches wide each)
• Step-by-step installation instructions

How to Measure & Order

1. Measure your wall height and choose a panel height equal to or slightly taller than that measurement (up to 120 inches).
2. Measure your wall width and divide by 24 inches to determine how many panels you need; round up to the next whole panel.
3. Add 5–10% extra for pattern matching, tricky areas, or future touch-ups.
4. Order all panels in one order to ensure a consistent color lot.

Installation Guidance

For best results, install on smooth, clean, fully cured paint (wait at least 30 days after painting). Avoid heavy texture, raw plaster, brick, or high-moisture areas.

1. Prepare the wall: wipe down to remove dust and let dry completely.
2. Mark a plumb vertical guide line for your first panel.
3. Align the top of the first panel, then gradually apply and smooth downward, working from the center out to remove air bubbles.
4. Butt or align patterns edge-to-edge across subsequent panels.
5. Trim excess at ceiling, baseboard, and around outlets with a sharp blade.

If your material requires paste, follow the included paste-the-wall directions. Always install a small test area first to confirm adhesion and surface compatibility.

Care & Maintenance

• Wipe with a soft, damp cloth; mild soap only if needed
• Avoid harsh chemicals, bleach, and abrasive scrubbers
• Keep away from prolonged moisture and steam
• To prevent edge lifting, avoid cleaning solutions that can seep under seams

Surface Compatibility

• Ideal: smooth, sealed, non-textured walls painted with eggshell, satin, or semi-gloss
• Not recommended: heavy texture, unsealed surfaces, high humidity areas, or flaking paint
• New paint must cure for at least 30 days before installation

Sustainability & Safety

• PVC-free substrate for a healthier indoor environment
• Printed with eco-friendly, water-based inks
• Made to order to reduce overproduction

Note: Color may vary slightly from screen to wall. We recommend ordering a sample to preview color and scale in your lighting.