Architectural Recessed Grid Wallpaper

Add depth, structure, and timeless character to your walls with our Architectural Recessed Grid Wallpaper. Designed to mimic the clean lines of classic paneling, this removable wallpaper creates a refined, architectural look without the cost or complexity of millwork.

Key Features

• Removable wallpaper ideal for rentals, accent walls, and quick style refreshes
• Roll size: 24 inches wide; choose custom heights up to 120 inches
• PVC-free substrate printed with eco-friendly, water-based inks
• Crisp grid motif designed to align across panels when installed on a plumb line
• Low-odor print process for a comfortable install experience
• Best for smooth, clean, sealed, and non-textured interior walls

Measure and Plan

1. Measure your wall height and select the roll height that meets or slightly exceeds it (allow extra for trimming at the ceiling and baseboard).
2. Determine quantity: divide your wall width (in inches) by 24, then round up to the next whole number for the number of panels needed.
3. For multi-wall or wrap-around installs, measure each span separately to ensure proper coverage and alignment.

Installation Guidance

1. Surface prep: walls must be clean, dry, smooth, and fully cured if recently painted (typically 3–4 weeks).
2. Mark a plumb reference line using a level; start your first panel on this line for a straight install.
3. Apply panel by panel, smoothing from the center outward to remove air bubbles. Do not stretch the material.
4. Align the grid across seams; use a sharp blade to trim at ceilings, baseboards, and around outlets.
5. Maintain a consistent room temperature during install for best adhesion.

Care Instructions

• Wipe clean with a soft, damp cloth; a small amount of mild soap may be used if needed.
• Avoid abrasive cleaners, scrub pads, and excessive moisture.
• Suitable for low-to-moderate humidity areas with proper ventilation; avoid direct water contact.

Removal Tips

To remove, slowly lift a top corner and peel back at a low angle. If you encounter resistance, gently warm the area with a hair dryer on low heat and continue peeling slowly.

Good to Know

• Final color may vary slightly based on lighting and wall color; testing a small area first is recommended.
• Install only on smooth, sound, non-porous surfaces. Not recommended for textured walls, raw plaster, or unsealed surfaces.
• Made with PVC-free materials and printed using water-based inks for a more eco-conscious choice.