Architectural Shadow Play

Transform any room with Architectural Shadow Play, a modern, dimensional wallpaper that layers soft gradients and clean lines to mimic sunlit architecture. The design adds depth and quiet drama, making small spaces feel larger and curated spaces feel gallery-ready.

All of our wallpapers are PVC-free and printed with eco-friendly, water-based inks. Each roll is 24 inches wide and available in heights up to 120 inches to fit most walls with a tailored finish.

Key Features

• Removable, renter-friendly design
• PVC-free material printed with eco-friendly, water-based inks
• Roll width: 24 inches; heights up to 120 inches for a custom fit
• Matte, low-glare finish that showcases crisp lines and tonal shadows
• Edge-to-edge pattern alignment for a seamless look
• Best for smooth, clean, and dry interior walls
• Repositionable during installation for precise pattern matching

Sizing and Coverage

Order the number of 24-inch-wide rolls needed to cover your wall, choosing the roll height closest to your wall height (add extra for trimming).

1. Measure your wall width in inches.
2. Divide by 24, then round up to get the number of rolls.
3. Select a roll height equal to your wall height, adding 2–4 inches for top and bottom trim.

Example: A 96-inch-wide wall needs 4 rolls (96 ÷ 24 = 4). Choose a roll height that slightly exceeds your wall height for a clean trim line.

Installation Guidance

1. Ensure walls are smooth, clean, and fully cured (wait at least 30 days after painting). Avoid heavy texture, dust, or moisture.
2. Mark a plumb line to keep the first roll perfectly vertical.
3. Starting at the top, peel back a small section of the liner and adhere the roll, smoothing from the center outward.
4. Work downward in sections, peeling more liner as you go. Use a felt squeegee or soft cloth to remove air bubbles.
5. Align the next roll edge-to-edge, matching the pattern. Gently lift and reposition as needed.
6. Trim excess at the ceiling, baseboards, and around outlets with a sharp blade.

Tip: Moderate room temperature and a dry environment improve adhesion. If your walls are highly textured or newly painted, test a small area first.

Care and Removal

• Wipe clean with a soft, damp cloth. Avoid harsh chemicals, bleach, or abrasive pads.
• For removal, slowly peel from a top corner at a low angle. Warming with a hair dryer on low can help release adhesion.
• Suitable for most smooth painted surfaces; not recommended for high-texture walls, raw plaster, or areas with persistent moisture.