Argent & Gold Celestial Feathers

Float a whisper of quiet glamour across your walls. Argent & Gold Celestial Feathers features an airy feather motif in refined silver-and-gold tones, bringing soft movement and a celestial glow to bedrooms, living rooms, nurseries, and inspired workspaces. This removable wallpaper installs cleanly, transforms instantly, and lifts off when you’re ready for a new look.

All of our wallpapers are PVC-free and printed with eco-friendly, water-based inks for a beautiful, low-impact finish you can feel good about.

Key Features

• Removable and renter-friendly: Peel-and-stick application with clean removal on most properly painted walls.
• PVC-free: Made without PVC and printed with water-based inks.
• Easy to install: No paste, no mess—just measure, peel, and smooth.
• Versatile design: Elegant feather pattern in argent and gold-inspired hues suits modern, classic, and bohemian spaces.
• Panel sizing: Each roll is 24 in wide and available in heights up to 120 in to fit standard walls.
• Renter and refresh friendly: Ideal for accent walls, entryways, and feature niches.

Sizing & Coverage

• Roll width: 24 in (61 cm)
• Roll height: Choose your height up to 120 in (305 cm)
• How many rolls do you need? Measure your wall width in inches, divide by 24, and round up to the next whole number. For example, a 120 in wall typically needs 5 rolls.
• Trim allowance: Add 2–3 in to your selected height to account for ceiling and floor variations.

Installation Guidance

1. Prepare the wall: Surface must be smooth, clean, and dry. Allow fresh paint to cure for at least 30 days.
2. Plan your layout: Use a level or laser to mark a plumb line. Start in the center of the wall or at the most visible edge.
3. Peel and position: Peel back 8–12 in of the liner, align the top, and lightly tack in place.
4. Smooth as you go: Working downward, smooth from the center outward while gradually removing the backing.
5. Edge-to-edge seams: Butt adjoining panels carefully for a seamless look—do not overlap.
6. Trim: Use a sharp blade to trim along ceilings, baseboards, and around outlets.

Surface & Paint Compatibility

• Best on smooth, non-textured surfaces painted with well-cured eggshell, satin, or semi-gloss finishes.
• Not recommended for heavy texture, brick, stucco, or areas with direct water contact.
• Some stain-resistant, low/zero-VOC, or Teflon-infused paints can reduce adhesion—always test first.
• Test a small piece on your wall for 24 hours to confirm adhesion and clean removability.

Care & Removal

• Wipe gently with a soft, damp cloth. Mild soap as needed. Avoid abrasives, bleach, and harsh chemicals.
• For bathrooms, ensure good ventilation and avoid direct water spray.
• To remove, peel slowly at a low angle, pulling back on itself. If needed, warm with a hair dryer on low.

Designed for easy, beautiful transformations—crafted PVC-free and printed with eco-friendly, water-based inks.