Artisan Stone & Concrete Medley

Bring the timeless character of stone and concrete to your space—without the dust or demolition. Artisan Stone & Concrete Medley is a removable wallpaper designed to deliver a modern, organic look that pairs effortlessly with minimalist, industrial, or contemporary decor.

Key Features

• Removable and renter-friendly: Installs cleanly and lifts off without residue on most properly prepared, painted walls.
• Eco-conscious materials: PVC-free substrate printed with eco-friendly, water-based inks.
• Size options: Each roll is 24 inches wide with selectable heights up to 120 inches for floor-to-ceiling coverage.
• Seamless look: Precision-cut edges for clean butt seams and a smooth, continuous pattern.
• Matte finish: A soft, low-glare surface that mimics the depth and texture of natural stone and poured concrete.
• Repositionable during install: Adjust panels as you go for a perfect alignment.
• Best on smooth walls: Apply to clean, dry, non-textured, and properly primed/painted surfaces.

How Much to Order

Measure your wall height and choose the roll height closest to (or slightly taller than) your measurement, up to 120 inches. Each roll covers 24 inches in width—divide your wall width by 24 to estimate the number of rolls needed. Always add a small margin for pattern alignment and trimming.

Installation Guidance

1. Prepare the surface: Walls must be smooth, clean, and fully dry. If freshly painted, allow a minimum of 30 days to cure.
2. Plan your layout: Mark a plumb line to keep the first panel perfectly vertical. Dry-fit panels to preview pattern flow.
3. Apply the first panel: Starting at the top, peel back 6–8 inches of the backing and align to your plumb line. Smooth downward with a felt squeegee or soft cloth, peeling more backing as you go.
4. Match seams: Install the next panel edge-to-edge (butt seam), carefully aligning the pattern. Avoid stretching the material.
5. Finish and trim: Use a sharp blade and straightedge to trim along ceilings, baseboards, and openings.
6. Removal: Lift a corner and peel back slowly at a low angle. If resistance is felt, gently warm with a hair dryer on low.

Care Instructions

• Wipe with a soft, damp, lint-free cloth; use mild soap if needed.
• Avoid abrasives, bleach, or ammonia-based cleaners.
• Keep away from direct heat, excessive steam, or high-moisture zones.
• Test cleaning in an inconspicuous area first.

Note: Colors can vary by monitor and lighting. For best results, order all rolls for a project at once and install in numerical order.