Authentic Aged Brick Facade

Bring the character of timeworn masonry to your space with a removable wallpaper that looks like real brick—without the dust or demo. Authentic Aged Brick Facade features nuanced tones, mortar details, and a matte finish for a convincingly vintage, industrial look. Every roll is PVC-free and printed with eco-friendly, water-based inks for a cleaner, low-odor upgrade to your walls.

Size and Coverage

• Panel width: 24 inches
• Custom height: up to 120 inches per panel
• Panels install edge-to-edge for a continuous brick facade

Key Features

• Realistic aged brick artwork with rich texture and depth
• PVC-free material printed with eco-friendly, water-based inks
• Low-glare, matte finish for a natural, photo-real look
• Removable design that’s renter-friendly and damage-conscious
• Aligns cleanly for near-seamless joins between 24-inch panels
• Ideal for accent walls, living rooms, studios, and offices

Before You Order

• Measure the wall width and divide by 24 inches to estimate the number of panels needed; add 10% for trimming and pattern alignment.
• Install on smooth, clean, dry, and primed walls. Fresh paint should cure fully (typically 30 days).
• Not recommended for heavy texture, high humidity, or stain-resistant/low-VOC paints that can reduce adhesion.
• Order a sample to confirm color and scale in your lighting.

Installation Guidance

1. Unroll and let panels acclimate in the installation room for 24 hours.
2. Mark a plumb line to keep your first panel perfectly straight.
3. Apply using the method suited to your wallpaper type. For peel-and-stick: peel a small section of liner, adhere from the top, and smooth down gradually. For paste-the-wall: apply a thin, even coat of clear, strippable adhesive and hang the panel from top to bottom.
4. Smooth outward with a wallpaper tool to remove air and ensure firm contact.
5. Butt seams (do not overlap) and align the brick pattern as you go.
6. Trim at ceilings, baseboards, and around outlets using a sharp blade.
7. To remove, lift a corner and peel back slowly at a low angle. If adhesive was used, soften with warm water as needed and pull gently.

Care Instructions

• Wipe with a soft, damp cloth as needed; avoid abrasive cleaners and scrubbing seams.
• Keep away from direct heat sources and prolonged moisture.
• Avoid harsh chemicals to preserve print vibrancy and finish.

Good to Know

• PVC-free substrate and water-based inks support healthier indoor air.
• Color can vary slightly between batches; purchase panels together for the best match.