Blushing Peony Linen Weave

Bring a serene garden mood to your space with Blushing Peony Linen Weave. Soft, watercolor peonies bloom over a subtle linen-weave texture, creating a refined, romantic backdrop that suits bedrooms, nurseries, living areas, and entryways. This high-quality removable wallpaper is PVC-free and printed with eco-friendly, water-based inks for a beautiful, low-impact upgrade.

Key Features

• Removable, renter-friendly design: Applies cleanly and removes without damaging most properly painted walls.
• Premium look: Linen-weave texture and matte finish reduce glare and elevate any room.
• PVC-free material: Free from phthalates and vinyl; printed with eco-friendly, water-based inks.
• Size options: Rolls are 24 inches wide with selectable heights up to 120 inches to match your wall.
• Durable and cleanable: Resistant to everyday wear; wipes clean for easy upkeep.
• Great for DIY: Simple, step-by-step installation with pattern alignment.

Sizing and Coverage

Each roll is 24 inches wide and available in heights up to 120 inches. To estimate how many rolls you need, measure your wall width in inches, divide by 24, and round up to the next whole number. For best results, add 1–2 inches to your selected height for trimming at the ceiling and baseboard.

Installation Guidance

1. Prepare the surface: Walls should be smooth, dry, and fully cured. Allow fresh paint to cure for at least 30 days. Clean with a damp cloth and let dry.
2. Plan your layout: Mark a straight, plumb line to guide your first panel. Always start from the most visible corner.
3. Peel and place: Peel 6–12 inches of the backing and position the top of the panel. Stick lightly so you can reposition if needed.
4. Smooth as you go: Working top to bottom, peel more backing and smooth with a felt squeegee or soft cloth to remove air bubbles.
5. Align the pattern: Butt the edges (do not overlap) and match the design across each seam.
6. Trim excess: Use a sharp utility knife and straightedge to trim at ceilings, baseboards, and around outlets or fixtures.
7. Final check: Re-smooth seams and edges to ensure full adhesion.

Surface note: Not recommended for textured walls, high-moisture areas, or surfaces painted with stain-resistant/low-VOC paints that can inhibit adhesion. Always test a small area first.

Care and Maintenance

• Wipe with a soft, damp cloth; mild soap only if needed.
• Avoid abrasives, bleach, or strong solvents.
• Indoor use only; keep away from direct heat or constant steam.
• To remove, gently peel from a corner at a 180° angle, pulling slowly.

Sustainability: Our wallpapers are PVC-free and printed with eco-friendly, water-based inks to reduce indoor pollutants and environmental impact.