Brutalist Concrete Formwork Wallpaper

Bring the raw poetry of board-formed concrete to your walls—without the weight or permanence. This removable wallpaper captures the grain, seams, and depth of poured concrete formwork for a sophisticated industrial-modern look that pairs effortlessly with minimalist, contemporary, and eclectic interiors.

Key Features

• Authentic concrete formwork texture with high-resolution detail for a realistic architectural finish.
• Removable and renter-friendly design made for easy application and clean removal on most painted walls.
• Panels measure 24 inches wide and up to 120 inches high to fit floor-to-ceiling spaces.
• PVC-free material printed with eco-friendly, water-based inks—low odor and home-safe.
• Made to order to reduce waste, ensuring fresh, consistent print quality.

Sizing and Coverage

Each roll is a vertical panel 24 inches wide. Choose a panel height up to 120 inches to match your wall.

1. Measure your wall height; add 1–2 inches for trim.
2. Measure your wall width in inches and divide by 24; round up to the next whole number to find how many panels you need.

Example: A 144-inch wide wall needs 6 panels (144 ÷ 24 = 6). For a 10-foot wall height, select 120-inch panels.

Installation Guidance

1. Prep the wall: Surface must be smooth, clean, dry, and fully cured. Fill holes, sand bumps, and remove dust. Fresh paint should cure at least 30 days.
2. Plan your layout: Mark a straight plumb line to start. Unroll and sequence panels in order for a continuous pattern.
3. Apply:
   • If peel-and-stick: Peel 6–12 inches of backing, align to your plumb line, and smooth downward with a felt squeegee. Continue peeling and smoothing. Butt seams edge-to-edge without overlap.
   • If paste-the-wall: Use a high-quality, strippable adhesive per the manufacturer’s instructions. Hang the panel, smooth from center outward, and butt seams.
4. Finish: Smooth out bubbles; lift and reposition as needed—avoid stretching. Trim excess at ceiling and baseboard with a sharp blade.

Tips: Avoid heavily textured, high-Teflon, or flaking surfaces. Test a small area if unsure. Maintain a consistent room temperature during install.

Care and Maintenance

• Dust regularly with a dry microfiber cloth.
• Spot clean with a lightly damp microfiber cloth and mild soap if needed; avoid abrasives, bleach, or solvents.
• For removal, slowly peel back at a low angle. Remove carefully to help protect your paint.

Sustainability

All of our wallpapers are PVC-free and printed with eco-friendly, water-based inks, delivering a low-odor, design-forward solution that’s safe for homes and rentals.