Brutalist Concrete Grid

Bring architectural edge to your space with a minimalist grid inspired by raw concrete. Brutalist Concrete Grid is a removable wallpaper designed for modern homes, studios, and workspaces. Its structured lines and subtle concrete texture add depth without overwhelming a room—perfect for feature walls, entryways, and refined industrial decor.

Every roll is PVC-free and printed with eco-friendly, water-based inks for a safer choice in your home.

Key Features

• Removable and renter-friendly: Designed to go up smoothly and come down cleanly from most properly painted, smooth walls.
• Premium look: Matte finish reduces glare and enhances the concrete-inspired texture and grid detail.
• Eco-conscious: PVC-free material printed with water-based inks—no harsh solvents.
• Flexible sizing: Each roll is 24 inches wide; select heights up to 120 inches to match your wall.
• Versatile style: Crisp geometry pairs with neutral tones for modern, industrial, and minimalist interiors.

Sizing and Coverage

• Roll width: 24 inches.
• Available heights: up to 120 inches.
• Measure your wall width and divide by 24 inches to estimate rolls needed. Add a little extra for trimming and pattern alignment.
• For the best color match across a wall, order all rolls for a project at the same time.

Installation Guidance

1. Prep the wall: Apply only to smooth, clean, dry, and fully cured painted surfaces. Wipe away dust and let dry.
2. Plan your layout: Mark a level vertical line to keep the first roll perfectly straight.
3. Apply: Peel back a small section of the liner and stick the top of the roll to the wall. Smooth downward as you gradually remove the liner.
4. Smooth: Use a plastic smoother or soft cloth to press out air bubbles from the center toward the edges.
5. Align the grid: Hang the next roll edge-to-edge, carefully matching the grid lines.
6. Trim: Use a sharp blade to trim along ceilings, baseboards, and outlets.
7. Adjust as needed: If you see bubbles or misalignment, gently lift and reapply.

Care Instructions

• Wipe clean with a soft, damp cloth; add a small amount of mild soap if needed.
• Avoid abrasive scrubbers, bleach, or harsh chemicals.
• Do not soak. Keep away from persistent moisture and high steam.

Good to Know

• Apply only to smooth, non-textured walls. Not recommended on brick, concrete block, or heavy orange-peel textures.
• Fresh paint should cure fully (typically 2–4 weeks) before installation.
• Surface conditions vary; test a small area if you’re unsure about paint or adhesion.