Brutalist Sunset Grid

Bring structure and warmth to your space with Brutalist Sunset Grid, a removable wallpaper that balances bold geometry with soft, sunset-inspired tones. Designed for renters and renovators alike, this eco-friendly, PVC-free wallpaper installs cleanly, removes easily, and instantly refreshes walls with a modern, architectural grid.

Key Features

• Removable, renter-friendly wallpaper: installs without mess and peels off cleanly when it’s time to refresh.
• Eco-conscious materials: PVC-free substrate printed with eco-friendly, water-based inks for low-odor, indoor-safe use.
• Crisp, modern design: a brutalist-inspired grid softened by sunset hues for timeless depth and balance.
• Flexible sizing: rolls are 24 inches wide with selectable heights up to 120 inches for a near floor-to-ceiling fit.
• Seamless look: designed for edge-to-edge alignment across multiple rolls.
• Versatile style: perfect for living rooms, bedrooms, offices, entryways, and creative studios.

Sizing and Coverage

Each roll is 24 inches (61 cm) wide. Choose a height up to 120 inches (305 cm) to match your wall. Measure your wall height and select the next suitable roll height, allowing a little extra for trimming at the ceiling and baseboard.

• To cover a wall, divide the total wall width by 24 inches to estimate the number of rolls needed. Add 5–10% for pattern alignment and trimming.
• Order all rolls for a project at once to ensure consistent color across panels.

Surface Prep

• Apply to clean, dry, smooth, and primed walls. Avoid heavy texture, brick, and uneven surfaces.
• If recently painted, allow the paint to fully cure (typically 30 days) before installation.
• Wipe the wall to remove dust and oils. Mark a plumb line to keep the first panel perfectly straight.

Installation Guide

1. Unroll and inspect panels; arrange them in hanging order.
2. Start at a plumb line. Peel back 6–12 inches of the liner at the top.
3. Align the top edge, then smooth downward with a felt squeegee, peeling more liner as you go.
4. Match the grid lines at the seam for a continuous pattern; avoid stretching the material.
5. Work out bubbles by smoothing from the center outward.
6. Trim excess at ceiling, baseboard, and around fixtures with a sharp blade.
7. Repeat for remaining panels, checking alignment as you go.
8. For removal, lift a corner and peel back slowly at a low angle; warm gently with a hair dryer if needed.

Care Instructions

• Dust or wipe with a soft, damp, lint-free cloth.
• Use mild soap only if needed; avoid abrasives, bleach, and solvent cleaners.
• Indoor use only; prolonged steam or direct water contact may affect adhesion.

Good to Know

• Colors may vary slightly by screen; ordering a sample is recommended to test color and adhesion on your wall.
• Best on smooth, properly primed walls with fully cured paint.
• Made without PVC and printed with eco-friendly, water-based inks.