Caramel Silkwood Stripe Wallpaper

Refresh your space with the warm, timeless look of the Caramel Silkwood Stripe Wallpaper. Its clean, vertical stripes add height and balance to any room, bringing a modern-classic feel that pairs beautifully with neutral palettes and natural materials. Designed for easy updates, this removable wallpaper is renter-friendly and perfect for accent walls, living rooms, bedrooms, nurseries, and home offices.

Key Features

• Removable wallpaper for effortless style updates and rental-friendly makeovers
• Rolls measure 24 inches wide; available in heights up to 120 inches
• PVC-free material and printed with eco-friendly, water-based inks
• Crisp, vertical striping that visually elongates walls
• Ideal for smooth, properly prepared interior walls

Size & Coverage

• Roll width: 24 in (2 ft)
• Roll height: select up to 120 in (10 ft)
• Coverage per roll equals 2 ft x selected height (for example, 20 sq ft at 120 in height)

Measuring tip: Measure your wall width in inches, divide by 24, and round up to the next whole panel. Add a small margin for trimming and alignment.

Materials & Sustainability

• PVC-free substrate for a safer, vinyl-free choice
• Printed with eco-friendly, water-based inks
• Low-odor printing suitable for home environments

Installation Guidance

1. Prepare: Ensure walls are smooth, clean, dry, and fully cured from recent paint. Fill holes, sand lightly, and wipe away dust.
2. Plan: Mark a straight, vertical plumb line where your first panel will hang.
3. Apply: Starting at the top, align the panel to your plumb line. Peel a small section of backing at a time and smooth downward with a squeegee or soft cloth.
4. Align: Hang subsequent panels edge-to-edge. Do not overlap. Align stripes carefully and avoid stretching the material.
5. Finish: Trim excess at ceiling, baseboard, and around outlets with a sharp blade and straightedge.

Best results on smooth, painted walls with a quality primer. Not recommended for heavily textured, dusty, or unsealed surfaces.

Care Instructions

• Wipe gently with a soft, damp cloth; mild soap if needed
• Avoid abrasive cleaners, bleach, and excessive scrubbing
• Suitable for low to moderate humidity; ensure good ventilation in bathrooms
• To remove, peel slowly from a top corner at a low angle

Note: Colors may vary slightly due to screen settings and lighting. For the most seamless look, install panels in numerical order and handle edges carefully.