Celestial Cratered Moonscape

Transform your space with a serene lunar landscape. Celestial Cratered Moonscape captures the depth and quiet drama of cratered terrain, bringing an elegant, modern moonscape to bedrooms, nurseries, offices, and creative studios.

This removable wallpaper is PVC-free and printed with eco-friendly, water-based inks for a low-odor, family-friendly finish. Each roll installs cleanly and removes without residue, making it ideal for renters and long-term style updates alike.

Size and Fit

Each roll is 24 inches wide and available in heights up to 120 inches. Install panels side by side for a seamless pattern across your wall. For full-wall applications, measure your wall width, divide by 24 inches to determine the number of panels, and add an extra panel if rounding up. Allow a small margin for trimming at the ceiling and baseboard.

Key Features

• Removable, renter-friendly wall covering
• PVC-free material printed with water-based inks
• Matte, glare-free finish with crisp lunar details
• Repositionable during installation
• Made to order to reduce waste and ensure fresh, consistent color
• Ideal for smooth, clean, and dry interior walls

Installation Guidance

1. Ensure walls are smooth, clean, fully dry, and free of dust or grease. Newly painted walls should cure completely before installation.
2. Gather tools: tape measure, level, pencil, smoothing tool or squeegee, utility knife, and a step stool.
3. Mark a plumb line to start straight. Accurate alignment on the first panel ensures a seamless pattern across the wall.
4. Peel back 8–12 inches of the backing at the top of the first panel. Align to the plumb line and tack in place.
5. Smooth downward from the center outward, peeling more backing as you go to avoid bubbles.
6. Butt-join subsequent panels edge to edge. Adjust gently to match the moonscape pattern before fully smoothing.
7. Use a sharp blade to trim excess along ceilings, baseboards, and around fixtures.
8. If bubbles appear, lift and reapply; stubborn air pockets can be released with a pin and smoothed flat.

Best on properly primed, smooth walls. Not recommended on heavy texture, brick, stucco, or areas with moisture or high steam.

Care Instructions

• Wipe with a soft, damp cloth; a small amount of mild soap may be used if needed.
• Avoid harsh chemicals, bleach, abrasive scrubbers, and excessive soaking.
• Keep away from direct heat sources and prolonged high humidity.
• For color consistency, install panels from the same order in sequence and avoid mixing batches.

Good to Know

• Order a sample to test color in your lighting and check adhesion on your wall finish.
• Colors may vary slightly by monitor; viewing a sample on-site is the best guide.
• Measure carefully and consider 10% extra coverage to account for trimming and pattern alignment.