Celestial Glow on Woven Waves — Removable Wallpaper

Bring a serene, modern aura to your space with Celestial Glow on Woven Waves. Soft, luminous arcs flow across a subtle woven texture, creating a calm, elevated backdrop for bedrooms, living rooms, and entryways. Designed for easy updates and renter-friendly refreshes, this self-adhesive wallpaper removes cleanly when it’s time for a new look.

Key Features

• Removable and renter-friendly: Peel, stick, and reposition during install; remove cleanly when you’re ready for a change.
• Eco-conscious: PVC-free material printed with eco-friendly, water-based inks.
• Premium finish: Smooth, satin-matte surface reduces glare and highlights crisp details.
• Sized for real walls: Rolls are 24 inches wide with selectable heights up to 120 inches to fit accent walls, niches, and doors.
• Low-commitment impact: Ideal for feature walls, rentals, nurseries, and quick weekend refreshes.

Size & Coverage

Each roll is 24 in W (61 cm) and available in heights up to 120 in (305 cm). Choose the height closest to your wall and allow 1–2 in for trimming.

• Measure your wall width and divide by 24 in to estimate the number of rolls needed.
• Add 10% extra to account for pattern alignment and trimming around windows and doors.

Material & Safety

• PVC-free, self-adhesive wallpaper
• Printed with eco-friendly, water-based inks
• Low-odor; suitable for homes and studios with proper ventilation

Surface Compatibility

• Best on smooth, clean, dry, non-textured walls painted with standard interior latex.
• Allow fresh paint to cure fully (at least 30 days) before installation.
• Not recommended for heavy texture, high-moisture areas with direct water contact, or walls coated with stain-resistant/low-VOC slick finishes unless primed for adhesion.

Installation Guide

1. Prep: Wipe walls with a damp, lint-free cloth; repair and sand any bumps. Ensure the surface is fully dry.
2. Plan: Use a level to mark a plumb line where the first panel will hang.
3. Apply: Peel 6–12 in of backing, align the top, and smooth downward with a squeegee or soft cloth.
4. Seams: Butt seams edge-to-edge; gently lift and reposition as needed to match the pattern.
5. Finish: Trim excess at ceiling, baseboard, and around outlets with a sharp blade.
6. Removal: Peel slowly from a top corner at a low angle; warm with a hair dryer on low if needed.

Care Instructions

• Wipe gently with a soft, damp cloth as needed.
• Avoid harsh cleaners, bleach, and abrasive scrubbers.
• Test cleaning in an inconspicuous area first.

Good to Know

• Order all rolls at the same time to ensure a consistent print run.
• Colors may vary slightly by screen; a sample is recommended for final confirmation.
• Install at room temperature for best adhesion.