Charcoal Canyon Stacked Stone

Bring the rugged beauty of natural stone to your space—without the weight or mess. Charcoal Canyon Stacked Stone is a removable wallpaper that layers deep charcoal and slate tones to create realistic dimension, perfect for elevating living rooms, bedrooms, home offices, and entryways. All our wallpapers are PVC-free and printed with eco-friendly, water-based inks for a cleaner home and planet.

Key features

• Removable, renter-friendly wallpaper with a sophisticated stacked stone look
• PVC-free substrate printed with eco-friendly, water-based inks
• Low-odor and non-toxic; ideal for homes, nurseries, and workspaces
• Matte finish minimizes glare and enhances stone realism
• Rolls measure 24 inches wide and up to 120 inches high
• Tiles seamlessly side by side for full-wall or accent installations
• Best on smooth, clean, dry, non-textured surfaces

Sizing and coverage

Each roll is 24 inches wide and available in heights up to 120 inches. Measure your wall height and add 1–2 inches for trimming at the ceiling and baseboard. Order one roll per 24 inches of wall width.

• Example: For a 10-foot (120-inch) wide wall with a 9-foot (108-inch) ceiling, choose the 108-inch height and order 5 rolls (5 × 24 inches = 120 inches).
• If your walls aren’t perfectly plumb, consider one extra roll as a buffer.

Installation guidance

1. Prepare the wall: Wait at least 30 days after painting. Clean with mild soap and water, rinse, and let dry completely. Remove dust and switch plates.
2. Plan the layout: Mark a plumb vertical line where your first panel will go. Unroll and identify the order of panels for pattern alignment.
3. Apply: Starting at the top, peel 6–12 inches of backing, align to your plumb line, and smooth from the center outward. Continue peeling and smoothing in sections to prevent bubbles.
4. Seam the next panels: Butt edges gently without overlapping, matching the stone pattern as you go.
5. Trim: Use a sharp blade to trim at ceilings, baseboards, and around outlets.
6. Finish: Smooth any remaining bubbles. For easier removal later, peel slowly at a low angle; gentle warmth can help release the adhesive.

Not recommended for textured walls, unsealed surfaces, or high-humidity areas with frequent direct steam. Test a small area if unsure.

Care instructions

• Wipe clean with a soft, damp cloth; use mild soap if needed
• Avoid abrasives, bleach, and solvent cleaners
• Do not scrub or pressure-wash; avoid direct water spray
• Protect from sharp impacts in high-traffic areas

Good to know

• Colors may vary by screen; ordering a sample is recommended to confirm color and scale
• For best results, install in temperatures between 60–80°F (16–27°C)
• Made with PVC-free materials and printed using eco-friendly, water-based inks