Charcoal Ledge Stone Wall

Bring the depth and drama of stacked stone to your space—without the weight or mess. Charcoal Ledge Stone Wall is a removable wallpaper that delivers a realistic ledge-stone look in rich, modern charcoal tones. Printed on a premium, PVC-free material with eco-friendly, water-based inks, it’s a stylish, low-odor choice for living rooms, bedrooms, entryways, and more.

Why you’ll love it

• Authentic ledge-stone print adds dimensional texture and modern rustic character.
• PVC-free substrate printed with eco-friendly, water-based inks.
• Matte, glare-free finish that looks natural in any light.
• Removable design for renter-friendly updates and easy refreshes.
• Repositionable during install for clean alignment and crisp seams.
• Panels align for a continuous stone layout with minimal visible joins.

Size & coverage

Each roll is 24 inches wide and available in heights up to 120 inches to fit most walls and accent areas. Measure your wall width and divide by 24 inches to determine the number of panels needed. For the best fit, select a panel height that meets or slightly exceeds your wall height and trim on site.

Surface compatibility

• Best on smooth, clean, dry, and primed walls (paint cured at least 30 days).
• Not recommended on textured walls, unpainted drywall, or surfaces with Teflon/silicone paints.
• Test a small area if unsure about adhesion or finish.

Care & durability

• Wipe clean with a soft, damp cloth; mild soap if needed.
• Avoid abrasive cleaners, solvents, or excessive scrubbing.
• Suitable for low to moderate traffic areas; avoid direct water exposure.

Installation guidance

1. Prepare the wall: Fill holes, sand smooth, and clean away dust and oils. Ensure paint is fully cured.
2. Plan your layout: Use a level to mark a straight vertical guideline for your first panel.
3. Apply the first panel: Starting at the top, align to the guideline. Smooth downward with a felt squeegee or soft cloth, working from center outward to remove air.
4. Continue panel by panel: Butt-join edges carefully for a seamless look. Reposition gently as needed during install.
5. Trim: Use a sharp utility knife and straightedge to trim excess at ceilings, baseboards, and around outlets.
6. Removal: Peel slowly from a corner at a low angle. Properly primed walls should release cleanly.

Eco note: Our wallpapers are always PVC-free and printed with eco-friendly, water-based inks for a lower-impact, low-odor finish you can feel good about.