Classic Timber Wood Panel

Transform your space with the warmth and texture of natural wood—without the tools or mess. Classic Timber Wood Panel is a removable wallpaper designed for easy, renter-friendly updates in living rooms, bedrooms, offices, and entryways. Printed on a PVC-free material with eco-friendly, water-based inks, it delivers rich grain detail and a modern matte finish.

Key Features

Authentic timber panel look with realistic grain and depth
Removable, renter-friendly design for easy updates
Matte, glare-minimizing finish for a premium look
Seamless edge-to-edge alignment when installed correctly
PVC-free substrate printed with eco-friendly, water-based inks
Choose your panel height to fit your wall and reduce waste

Size & Coverage

Each roll is 24 in (61 cm) wide and available in heights up to 120 in (305 cm). Choose the height that matches your wall.

Measure your wall width in inches.
Divide by 24, then round up to the next whole number to determine how many rolls you need.

Example: A 108 in (9 ft) wide wall ÷ 24 = 4.5; order 5 rolls.

Surface & Room Compatibility

Best on smooth, clean, dry, painted walls (eggshell, satin, or semi-gloss).
Not recommended for heavy texture, raw drywall, or high-moisture areas.
Allow freshly painted walls to cure fully (typically 30 days).
If unsure, test a small area first.

Installation Guidance

Set aside time, read all steps first, and ensure walls are dust-free and fully dry.

Tools: measuring tape, level, pencil, smoothing tool or squeegee, sharp utility knife, microfiber cloth.

For peel-and-stick wallpapers:

Mark a level plumb line to guide your first panel.
Peel 6–12 in of backing, apply the top, align to the line, then peel and smooth downward.
Butt edges edge-to-edge (do not overlap) for a seamless look.
Trim at ceiling, baseboards, and around outlets with a sharp blade.

For paste-the-wall wallpapers:

Use a clear, strippable, non-staining adhesive suitable for removable wallcoverings.
Roll paste onto the wall in manageable sections; hang, align, and smooth.
Wipe any excess paste from the surface immediately with a damp sponge.

Care & Maintenance

Wipe gently with a soft, damp cloth; avoid abrasive cleaners or scrub pads.
Spot clean with a mild, diluted soap if needed; test in an inconspicuous area first.
Avoid direct saturation and prolonged steam exposure.

Removal

Lift a top corner and peel slowly at a low (180°) angle.
If you feel resistance, warm the area gently with a hair dryer and continue peeling.

Better Materials

All our wallpapers are PVC-free and printed with eco-friendly, water-based inks for a beautiful finish with a lighter footprint.