Concrete Cadence Wall Mural

Bring the quiet sophistication of poured concrete into your space—without the weight or permanence. The Concrete Cadence Wall Mural delivers a refined, tonal pattern that adds depth and calm to living rooms, bedrooms, offices, and entryways. This removable wallpaper is PVC-free and printed with eco-friendly, water-based inks for a beautiful, low-impact upgrade.

Key Features

• Modern concrete-inspired design with soft, organic movement
• Removable and renter-friendly for easy updates
• Panels measure 24 inches wide; heights available up to 120 inches
• Edge-to-edge alignment for a seamless mural look
• PVC-free material printed with eco-friendly, water-based inks
• Made for smooth, clean, and properly primed or painted walls

How to Measure

1. Measure your wall height and choose the panel height that meets or slightly exceeds it (up to 120 inches). Add 1–2 inches for trimming at the ceiling and baseboard.
2. Measure your wall width in inches.
3. Divide the wall width by 24 to determine how many panels you need, then round up to the next whole number. Example: 120 inches wide ÷ 24 = 5 panels.

Installation Guidance

For best results, install on smooth, dry, non-textured walls. Newly painted walls should cure for at least 30 days. Clean the surface and ensure it is free of dust, grease, and residue.

1. Use a level to mark a plumb line for your first panel.
2. Peel back a small section of the liner at the top, position the panel, and press it in place.
3. Working downward, continue peeling the liner while smoothing with a squeegee or soft cloth to remove air bubbles.
4. Align the next panel edge-to-edge, matching the pattern for a seamless look. Do not overlap.
5. Trim excess at the ceiling, baseboards, and around outlets with a sharp utility knife.

Tip: If a bubble appears, gently lift the panel and reapply, smoothing outward. Install in a dust-free environment and avoid high humidity during application.

Care Instructions

• Wipe gently with a soft, damp microfiber cloth.
• Avoid abrasive cleaners, bleach, or excessive scrubbing.
• Keep away from constant steam or direct water contact.
• To remove, slowly peel from a top corner at a low angle; warming the panel slightly with a hair dryer can help release the adhesive on delicate surfaces.

Note: Color may vary slightly from screen to print and between batches. Order panels together to ensure a consistent finish.