Dynamic Brushwork Abstract Mural

Make a bold statement with sweeping strokes and layered color. The Dynamic Brushwork Abstract Mural brings gallery-level energy to your space with a modern, painterly look. This removable wallpaper installs in aligned 24-inch panels for a seamless, custom-fit mural up to 120 inches high. Printed on PVC-free material with eco-friendly, water-based inks.

Key Features

• Removable, renter-friendly mural design
• Vivid, contemporary brushwork adds movement and depth to any room
• Panels measure 24 inches wide; select a height up to 120 inches
• PVC-free substrate for a safer home environment
• Printed with eco-friendly, water-based inks
• Butt-join edges for near-invisible seams
• Made to order for consistent color and crisp detail

Sizing and Measuring

• Measure the full width and height of your wall. Choose a panel height equal to or slightly taller than your wall (allow extra for trimming).
• Estimate panel count: divide your wall width by 24 inches and round up to the next whole panel.
• Order panels for the full wall at the same time to ensure color continuity.

Materials and Safety

• PVC-free wallpaper material
• Eco-friendly, water-based inks for vibrant, long-lasting color
• Low-odor print process suitable for homes and creative spaces

Care Instructions

• Wipe gently with a soft, damp cloth.
• Use mild, non-abrasive soap if needed; avoid bleach and harsh cleaners.
• Do not scrub aggressively. Test any cleaner on a small area first.

Installation Guidance

1. Prep the wall: Ensure the surface is smooth, clean, dry, and properly primed/painted. Remove dust and fill any holes. Allow newly painted walls to fully cure.
2. Plan your layout: Mark a straight plumb line where the first 24-inch panel will go. This first panel sets the alignment.
3. Apply the first panel: Position at the top and align to the plumb line. Smooth downward with a plastic smoothing tool, working out any air bubbles.
4. Join panels: Install remaining panels edge-to-edge (butt-join), carefully aligning the artwork across seams.
5. Trim and finish: Use a sharp blade to trim at ceilings, baseboards, and around outlets. Replace switch plates and step back to admire your mural.
6. Removal: When it’s time for a change, slowly peel at a low angle. On properly prepared walls, the material typically removes cleanly.

Surface Compatibility

• Best on smooth, sealed, and primed/painted walls (drywall or plaster).
• Not recommended on textured surfaces, unsealed wood, brick, or areas with persistent moisture or steam.
• Ensure good ventilation in kitchens and bathrooms and avoid direct water contact.