Echoes in Concrete Grid – Removable Wallpaper

Bring modern calm to your space with Echoes in Concrete Grid. This refined, architectural design layers soft concrete tones with a subtle grid, creating a structured yet soothing backdrop for living rooms, bedrooms, workspaces, and entryways. Our removable wallpaper is PVC-free and printed with eco-friendly, water-based inks for a beautiful, responsible refresh.

Key Features

• Removable and renter-friendly: Installs cleanly and peels off without damaging properly painted walls.
• PVC-free: Made without vinyl for a healthier home environment.
• Eco-conscious printing: Produced with water-based inks and no added solvents.
• Sized for real walls: Rolls are 24 inches wide and available in heights up to 120 inches.
• Smooth application: Reposition during install to align the grid with ease.
• Versatile style: Neutral concrete texture and crisp lines complement modern, industrial, and minimalist decor.

Sizing and Coverage

Each roll is 24 inches (61 cm) wide. Choose a height up to 120 inches (305 cm) to match your wall. To estimate quantity, measure your wall width and divide by 24 inches; add an extra panel if your measurement is close or you plan pattern-centered layouts.

Surface Suitability

• Best on smooth, clean, dry, and sound surfaces that are painted with eggshell, satin, or semi-gloss finishes.
• Not recommended on textured walls, unpainted drywall, brick, or surfaces with moisture, grease, or dust.
• Allow fresh paint to cure fully (typically 30 days) before installation.

Care Instructions

• Wipe gently with a soft, damp cloth.
• Use mild, non-abrasive soap if needed; avoid bleach and harsh cleaners.
• Avoid excessive scrubbing to preserve the printed finish.

Installation Guidance

1. Prepare: Clean the wall with a mild solution and let it dry completely. Remove outlet covers and hardware.
2. Plan: Measure and mark a plumb vertical guide line to keep the first panel perfectly straight.
3. Apply: Starting at the top, align the panel with your guide. Adhere gradually, smoothing downward and outward to remove air bubbles.
4. Align: Install subsequent panels edge-to-edge (butt seams) and align the grid pattern carefully.
5. Trim: Use a sharp blade to trim along ceilings, baseboards, and around fixtures.
6. Reposition: If needed, gently lift and readjust to perfect the placement.

Removal

To remove, lift a corner and slowly peel back at a low angle. Adhesive releases cleanly from most properly primed and painted surfaces, helping keep walls damage-free.

Note: Colors may vary slightly by screen. For best results, install in a dust-free, climate-controlled environment.