Elegant Ivory Shagreen Wallcovering

Elevate your space with the refined look of shagreen in a soft ivory palette. This removable wallpaper delivers a luxurious, textured appearance without the maintenance of real leather—ideal for bedrooms, living rooms, nurseries, and chic home offices. Crafted on a PVC-free material and printed with eco-friendly, water-based inks, it’s a beautiful, responsible choice for modern interiors.

Key Features

• Removable and renter-friendly: Designed for easy, damage-free removal on most properly painted walls.
• Eco-conscious: PVC-free substrate printed with water-based inks.
• Low-glare finish: A sophisticated, faux-shagreen look that complements both warm and cool palettes.
• No paste required: Self-adhesive design makes installation straightforward.
• Roll size: 24 inches wide; choose heights up to 120 inches to fit your wall.

Sizing and Coverage

Each roll is 24 in wide. Select a height up to 120 in to match your wall. At 120 in high, one roll covers approximately 20 sq ft. Measure your wall width and divide by 24 in to estimate the number of rolls needed, then round up. Allow extra for trimming and pattern alignment.

Installation Guidance

1. Unroll and let the wallpaper acclimate flat for 24 hours.
2. Prep the surface: walls must be smooth, clean, dry, and fully cured (paint cured at least 30 days). Remove dust and glossy residues.
3. Mark a vertical plumb line to ensure a straight first drop.
4. Peel back a few inches of the liner, align the top of the roll to your plumb line, and apply from top to bottom, smoothing as you go.
5. Continue removing the liner gradually, smoothing outward to remove bubbles. Use a felt squeegee or soft cloth.
6. Butt-seam the next roll edge-to-edge, aligning the pattern.
7. Trim excess at ceilings, baseboards, and around outlets with a sharp blade.
8. For removal, slowly peel from a top corner at a low angle.

Care Instructions

• Wipe with a soft, damp cloth; use mild soap if needed.
• Avoid abrasive cleaners, bleach, and excessive moisture.
• Not recommended for textured walls, highly porous surfaces, or areas with heavy steam or direct water contact.
• Always test in an inconspicuous area first.

Note: Color may vary slightly depending on screen settings and lighting.