Ethereal Agate Flow

Bring organic elegance to your walls with Ethereal Agate Flow, a removable wallpaper inspired by the fluid veining of natural stone. Designed for effortless impact in living rooms, bedrooms, offices, and entryways, this premium wall covering is PVC-free and printed with eco-friendly, water-based inks for a beautiful, responsible refresh.

Key Features

• Agate-inspired flow pattern that adds natural movement and depth to any space.
• Removable and renter-friendly for a commitment-free transformation.
• PVC-free substrate printed with eco-friendly, water-based inks.
• Matte finish that minimizes glare and highlights the organic design.
• Made-to-order rolls are 24 inches wide and custom-cut up to 120 inches high.
• Designed for clean, continuous seams across panels.

Size and Coverage

Each roll is 24 inches (61 cm) wide. Choose a height from 24 up to 120 inches (61–305 cm) to match your wall. Order one roll per 24 inches of wall width.

1. Measure your wall width in inches.
2. Divide by 24 and round up to the next whole number to get your roll count.
3. Select a roll height that is 2–4 inches taller than your wall to allow for trimming.

Example: A 120 inch wide wall at 108 inches tall typically needs 5 rolls at 110–112 inches in height.

Installation Guidance

• Surfaces must be smooth, clean, dry, and fully cured (wait at least 30 days after painting).
• Fill holes and sand texture for best results; wipe away dust before starting.
• Use a level to mark a plumb line and align your first roll to it.
• Apply the first roll carefully, smoothing from the center outward to remove air pockets.
• Butt seams edge-to-edge and match the pattern as you go.
• Trim excess at ceilings, baseboards, and around outlets with a sharp utility knife.
• Install at room temperature and avoid high humidity during application.
• For best results, work with a helper.

Care Instructions

• Wipe gently with a soft, damp cloth; use mild soap only if needed.
• Avoid abrasive scrubbers, bleach, or solvent-based cleaners.
• Blot seams lightly—do not saturate or scrub.
• Always test cleaning in a discreet area first.

Good to Know

• PVC-free materials and water-based inks support a lower-impact, low-odor print process.
• Best on smooth, non-textured, properly primed walls; not recommended for heavy texture or high-moisture areas.
• Made to order to reduce waste and ensure a fresh, consistent print.