Ethereal Grove of Being

Invite a calm, nature-inspired ambiance into your space with Ethereal Grove of Being. This removable wallpaper brings the quiet poetry of a modern grove to your walls, offering a soft, airy motif that pairs beautifully with minimalist, coastal, and contemporary decor.

All our wallpapers are PVC-free and printed with eco-friendly, water-based inks for a low-odor, family-friendly finish you can feel good about.

Key Features

Removable, peel-and-stick design for easy application and clean removal
Matte, glare-minimizing finish with crisp, gallery-level detail
PVC-free material printed with eco-friendly, water-based inks
Ideal for renters, refreshes, and feature walls
Repositionable during install to align patterns and seams

Size & Coverage

Each roll is 24 inches wide and available in heights up to 120 inches to fit most ceilings.

Estimate rolls by dividing your wall width (in inches) by 24, then round up.
For an 8 ft ceiling (96 inches), one roll covers about 16 sq ft; for a 10 ft ceiling (120 inches), about 20 sq ft.
Add 2–4 inches to your selected height for trimming at the ceiling and baseboard.

Installation Guidance

Prep: Apply to smooth, clean, dry, and fully cured painted walls. Allow new paint to cure for at least 30 days. Wipe walls with mild soap and water; avoid cleaners with Teflon or silicone.
Plan: Mark a plumb line to keep the first panel straight. Unroll and align the pattern before removing much of the backing.
Apply: Peel 8–10 inches of backing, align the top, then smooth downward with a squeegee from the center out, peeling more backing as you go. Do not stretch the material.
Seams: Butt seams gently and match the design. If walls are uneven, a slight overlap can help; test first.
Trim & Finish: Use a sharp utility knife and straightedge to trim at the ceiling, baseboard, and around outlets (power off).
Removal: Peel slowly at a low angle. If needed, gently warm with a hair dryer to release adhesive.

Care Instructions

Wipe clean with a soft, damp cloth; mild soap as needed
Avoid harsh chemicals, bleach, and abrasive scrubbers
Suitable for low to medium-traffic walls; ensure good ventilation in bathrooms and avoid direct water exposure

Surface Compatibility

Best on: Smooth, properly primed and painted walls, sealed wood, glass, and metal
Not recommended for: Textured walls, brick, stucco, raw drywall, or paints with stain-resistant/low-stick additives

Sustainability

PVC-free substrate
Printed with eco-friendly, water-based inks
Low odor for a fresher install experience