Ethereal Morning Haze

Bring the quiet calm of daybreak to your space. Ethereal Morning Haze is a soft, misty gradient that brightens walls with subtle depth—perfect for bedrooms, living rooms, nurseries, and serene home offices. This removable wallpaper delivers designer impact without the commitment.

All our wallpapers are PVC-free and printed with eco-friendly, water-based inks for a beautiful, conscientious finish.

Key Features

• Removable and renter-friendly; adjust during install for a seamless look.
• PVC-free substrate printed with eco-friendly, water-based inks.
• Rolls are 24 inches wide and available in heights up to 120 inches for floor-to-ceiling coverage.
• Smooth, matte finish that minimizes glare and highlights the soft gradient.
• Best on smooth, clean, fully cured, painted walls; not recommended for textured surfaces or heavy moisture areas.

Sizing and Coverage

Each roll covers 24 inches in width and your selected height (up to 120 inches). To estimate how many rolls you need:

1. Measure your wall height and choose a roll height equal to or slightly taller than your wall for clean trimming.
2. Measure total wall width in inches and divide by 24; round up to the next whole number for the roll count.

Tip: Add a small margin to your height and width calculations to account for wall irregularities and precise pattern alignment.

Installation Guidance

1. Prep: Ensure the wall is smooth, dry, and free of dust or grease. Paint should be fully cured.
2. Plan: Mark a plumb vertical line where your first roll will go for a perfectly straight start.
3. Apply: Peel 6–12 inches of backing and adhere the top of the roll, leaving slight excess at the ceiling for trimming.
4. Smooth: Working downward, smooth with a felt squeegee or soft cloth, pushing air bubbles outward.
5. Align: Install the next roll edge-to-edge (do not overlap), matching the design as you go.
6. Finish: Trim excess at ceilings, baseboards, and around outlets with a sharp blade.
7. Adjust: If needed, gently peel back and reposition—take care not to stretch the material.

Care Instructions

• Wipe gently with a soft, damp cloth; use mild soap only if needed.
• Avoid abrasives, bleach, or solvent-based cleaners.
• Suitable for light humidity; avoid direct water spray and high-splash zones.
• For best results, keep away from textured walls and allow freshly painted walls to fully cure before installation.