Ethereal Silk Bloom Wallpaper

Elevate your space with a soft, floral statement. Ethereal Silk Bloom Wallpaper brings a light, refined touch to bedrooms, living rooms, nurseries, and feature walls—made for easy updates and apartment-friendly refreshes.

PVC-free and printed with eco-friendly, water-based inks, this removable wallpaper is designed for beautiful results with a lighter footprint.

Key Features

• Removable, renter-friendly wallpaper for home decor
• Panels are 24 inches wide; choose heights up to 120 inches
• High-resolution print for crisp, elegant florals
• Matte, glare-minimizing look to enhance detail and color
• PVC-free substrate; printed with eco-friendly, water-based inks
• Low-commitment design—refresh your room without permanent changes

Size & Coverage

Each roll (panel) measures 24 inches wide and up to 120 inches high. Measure your wall height and select the appropriate panel height. For wider walls, order the number of panels needed to span the total width.

• Example: A 96-inch-tall wall needs 96-inch panels; a 10-foot (120-inch) wide wall typically uses 5 panels (5 x 24 inches).
• Allow a small trimming margin at the ceiling and baseboard for the cleanest edge.

Surface Compatibility

• Best on smooth, clean, dry, and sound surfaces (painted drywall, smooth plaster, primed wood).
• Not recommended for heavy texture (orange peel, knockdown), raw brick, stone, or areas with persistent moisture.
• If freshly painted, allow paint to fully cure per the paint manufacturer’s guidance before installation.

Care & Maintenance

• Dust regularly with a dry, soft cloth.
• Spot-clean with a lightly damp microfiber cloth and mild soap if needed.
• Avoid harsh chemicals, abrasives, and excessive scrubbing.
• Keep away from prolonged direct water exposure and high-humidity zones.

Installation Guide

1. Prepare: Clean the wall with a mild cleaner; let it dry completely. Remove outlets/switch plates. Mark a plumb vertical guide line for your first panel.
2. Plan: Lay out panels in order and confirm the pattern direction and alignment.
3. Apply: Starting at the top, position the first panel along your plumb line. Adhere from top to bottom, smoothing as you go to remove air bubbles.
4. Align: Install the next panel, carefully matching the pattern. Use a butt seam unless the pattern indicates a slight overlap.
5. Smooth & Trim: Use a wallpaper smoother or squeegee for a flat finish. Trim excess at ceiling, baseboard, and around fixtures with a sharp utility knife.
6. Finish: Reattach switch plates and inspect seams. If needed, gently lift and reposition to perfect the pattern match.

Good to Know

• Order all panels for a project at the same time to ensure consistent color across the wall.
• Color may vary slightly from screen to wall due to display settings and lighting.