Forged Ember Stone Wall

Ignite your space with the warmth and depth of the Forged Ember Stone Wall removable wallpaper. This design layers ember-kissed tones over a forged stone motif, bringing the look of hand-hewn masonry to your walls—without the permanence. Perfect for renters and refresh-enthusiasts, it installs cleanly, removes easily, and elevates everything from entryways to cozy living rooms.

Key Features

• Removable and renter-friendly peel-and-stick wallpaper
• PVC-free material printed with eco-friendly, water-based inks
• Matte finish with a realistic forged-stone pattern for a modern, moody vibe
• Clean, low-odor printing suitable for home interiors
• Rolls are 24 inches wide and available in heights up to 120 inches for a custom fit

Size & Coverage

Each roll is 24 inches (2 feet) wide and can be ordered in heights up to 120 inches. To estimate how many rolls you need:

1. Measure your wall width in inches.
2. Divide by 24 and round up to the next whole number.
3. Select the roll height that matches (or slightly exceeds) your wall height to allow for trimming.

Tip: Add a small margin (about 1–2%) for leveling and trimming around ceilings, baseboards, and outlets.

Installation Guidance

1. Unpack and let the wallpaper acclimate flat for 24 hours.
2. Prep the wall: smooth, clean, dry, and fully cured paint (wait 30 days after painting). Avoid heavy texture, brick, or unsealed surfaces.
3. Mark a plumb line for your first panel.
4. Peel 6–12 inches of the backing from the top, align to the plumb line, and apply.
5. Smooth downward with a soft tool or cloth, peeling the backing as you go to remove bubbles.
6. Install subsequent panels edge-to-edge (butt seams, do not overlap) and match the pattern.
7. Trim excess at the ceiling, baseboards, and around openings with a sharp blade.
8. To remove, peel slowly from a top corner at a low angle. If needed, warm gently to ease release.

Always test a small area first. Not recommended on high-texture walls, surfaces with flaking paint, or paints with strong stain-blocking additives.

Care & Maintenance

• Wipe clean with a soft, damp cloth; mild soap if needed.
• Avoid abrasives, bleach, and strong solvents.
• Ensure good ventilation; avoid prolonged direct water exposure and heavy steam.
• Use gentle strokes at seams to keep edges secure.

Eco note: All our wallpapers are PVC-free and printed with eco-friendly, water-based inks.