Forged Rust and Steel Mural

Bring the raw character of industrial design into your space with the Forged Rust and Steel Mural. This removable wallpaper mural layers the rich patina of weathered metal with steel tones to create depth and drama—perfect for feature walls in living rooms, bedrooms, offices, and entryways. Printed on premium, PVC-free material with eco-friendly, water-based inks, it’s a stylish and conscious choice for modern homes and rentals.

Key Features

• Removable, renter-friendly wall mural designed for damage-free updates on most properly primed walls.
• PVC-free substrate printed with water-based inks for a low-odor, eco-conscious finish.
• Clean, seamless installation with 24 in (61 cm) wide panels; choose heights up to 120 in (305 cm).
• Crisp, true-to-design texture that captures forged rust and steel detail for a realistic, industrial look.
• Made-to-size height options help reduce waste and make trimming simple.

Sizing and Coverage

Each roll/panel is 24 inches wide and available in heights up to 120 inches. Measure your wall width and divide by 24 inches to determine how many panels you need, then round up.

• Example: A 120 in wide wall ÷ 24 in = 5 panels.
• Choose a panel height equal to (or slightly taller than) your wall height for clean trimming at the ceiling and baseboard.

Installation Guidance

1. Prepare: Ensure the wall is smooth, clean, dry, and fully cured (fresh paint should cure for at least 30 days). Remove dust, nails, and outlet covers.
2. Plan: Mark a plumb vertical line to guide the first panel for a straight start.
3. Apply: Starting at the left, align the first 24 in panel with your plumb line. Smooth from the center outward using a felt squeegee or soft cloth to remove bubbles.
4. Align: Hang the next panel edge-to-edge, carefully matching the design across seams. Continue across the wall.
5. Trim: Use a sharp blade and straightedge to trim excess at the ceiling, baseboards, and around outlets.
6. Removal: To remove, lift a top corner and slowly peel back at a low angle. On most properly primed surfaces, removal is clean and residue-free.

Care Instructions

• Dust gently with a dry, lint-free cloth.
• Spot clean with a damp cloth and mild soap only; avoid abrasive cleaners, bleach, and excessive moisture.
• Avoid installation on highly textured or damp surfaces, and keep away from direct heat sources and high humidity areas.
• Test any cleaner on a small, inconspicuous area first.

Good to Know

• Colors may appear slightly different in person due to screen settings and wall paint undertones; consider testing a sample on your wall.
• For best results, apply to smooth, properly primed walls with a satin or eggshell finish.