Fractured Earth Strata

Bring the quiet drama of geology indoors. Fractured Earth Strata layers organic lines and mineral-inspired textures into a sophisticated, modern statement—perfect for accent walls, entryways, studios, and living spaces.

Our removable wallpaper is PVC-free and printed with eco-friendly, water-based inks for a beautiful, low-impact finish you can feel good about.

Key Features

• Removable and renter-friendly: Designed for easy application and clean removal from most properly prepared walls.
• Eco-conscious: PVC-free substrate printed with water-based inks.
• Sized for real spaces: Panels are 24 inches wide and available in heights up to 120 inches to fit standard rooms and tall feature walls.
• Seamless look: Edge-to-edge alignment for a continuous, gallery-worthy pattern.
• Best on smooth walls: For sealed, clean, and smoothly painted surfaces. Not recommended on heavy texture, high-moisture areas, or surfaces with low/dirty paint adhesion.

Sizing and Coverage

Each panel covers 24 inches (about 61 cm) of wall width. Choose a panel height that meets or slightly exceeds your wall height (up to 120 inches / about 305 cm). For best results, add a small trimming margin at the top and bottom.

Installation Guidance

1. Prep the wall: Ensure the surface is smooth, clean, dry, and fully cured (fresh paint should cure for at least 30 days). Remove dust and grease; fill and sand imperfections.
2. Plan your layout: Find the most visible starting point and mark a plumb line for a perfectly straight first panel.
3. Apply the first panel: Align at the top, then apply while smoothing from the center outward to remove air. Work slowly and avoid stretching.
4. Match and continue: Butt edges carefully for a seamless pattern match. Smooth as you go.
5. Trim and finish: Use a sharp blade to trim excess at ceilings, baseboards, and around outlets. Change blades frequently for clean cuts.
6. Removal: When it’s time for a change, peel back slowly at a low angle. Warming the panel slightly can help ease removal.

Care Instructions

• Dust regularly with a dry microfiber cloth.
• Spot clean with a damp cloth and mild soap; avoid harsh chemicals, solvents, and abrasives.
• Do not soak; protect from prolonged moisture and steam.
• Always test cleaning in an inconspicuous area first.