Gilded Amethyst Dreamscape

Immerse your space in a luxurious wash of amethyst tones with painterly, gilded accents that evoke marble and mist. This removable wallpaper brings a modern, dreamy aesthetic to bedrooms, living rooms, nurseries, and creative studios—making a statement that feels both serene and artful.

PVC-free and printed with eco-friendly, water-based inks for a beautiful, low-odor finish you can feel good about.

Key Features

• Removable, renter-friendly wall covering for instant impact without long-term commitment
• Rolls measure 24 inches wide; select heights up to 120 inches to fit your wall
• Designed for clean, easy pattern alignment and a mural-like finish
• PVC-free substrate printed with water-based inks—no harsh odors
• Best on smooth, sealed, and painted interior walls

How to Choose Your Size

• Measure your wall height and select the next available roll height (up to 120 inches) to allow trimming at the top and bottom.
• Measure the total wall width in inches and divide by 24 to estimate the number of rolls; round up and add about 10% for trimming and pattern match.

Installation Guidance

1. Prep the surface: walls must be smooth, clean, dry, and fully cured (allow new paint to cure at least 14 days). Remove dust and outlet covers.
2. Mark a plumb vertical line to start your first panel perfectly straight.
3. Cut each panel 1–2 inches taller than your wall for easy trimming.
4. Align the first panel to the plumb line and smooth from top to bottom with a felt squeegee or soft cloth, pressing out air as you go. Avoid stretching.
5. Hang subsequent panels, carefully aligning the pattern and butting seams edge to edge.
6. Trim excess at the ceiling, baseboard, and around fixtures with a sharp utility knife. Change blades frequently for crisp edges.
7. Allow 24 hours for the installation to settle; re-smooth any edges if needed.

Care & Removal

• Wipe clean with a soft, damp cloth and mild soap if needed. Avoid abrasives and harsh chemicals.
• Suitable for low- to moderate-humidity interiors; not recommended for textured surfaces or areas with direct water exposure.
• To remove, lift a corner and peel back slowly at a low angle to release from the wall with minimal residue.