Gilded Cobalt Heritage Tiles

Bring heirloom elegance to your space with a cobalt-blue tile motif kissed with warm, gold-toned detailing. Gilded Cobalt Heritage Tiles is a removable wallpaper that delivers the look of historic ceramic tiles without the grout or commitment. Printed on a premium, PVC-free substrate with eco-friendly, water-based inks, it’s renter-friendly, design-forward, and made for effortless updates.

Key Features

• Removable and renter-friendly: Applies cleanly and removes without damage from most primed, painted walls.
• PVC-free + eco inks: Free of PVC, printed with water-based inks for a low-odor, family-friendly finish.
• Premium matte finish: Reduces glare so the cobalt and gold-look pattern stays rich and refined.
• Custom-fit rolls: 24 in wide with heights up to 120 in to fit standard and tall ceilings.
• Versatile styling: Perfect for accent walls, entryways, kitchens, dining rooms, and powder rooms with good ventilation.

Sizing & Coverage

Each roll measures 24 inches wide by your chosen height (up to 120 inches). At 120 inches high, one roll covers approximately 20 sq ft.

• Measure your wall width in inches and divide by 24 to estimate the number of rolls. Round up to the next whole roll.
• Add a little extra for trimming and pattern alignment.
• Order all rolls at the same time to ensure a perfect color match.

Installation Guidance

1. Prep: Apply to smooth, clean, dry, and fully cured painted walls (allow new paint to cure for at least 30 days). Avoid heavy texture, fresh paint, and high-moisture areas like shower surrounds.
2. Plan: Mark a straight, plumb line where your first roll will go. Lay out rolls in order to align the tile pattern.
3. Apply: Starting at the top, align the first panel to the plumb line. Smooth downward in small sections, pressing out air with a squeegee or soft cloth. Do not stretch the material.
4. Seams: Butt-join edges (do not overlap) and carefully match the pattern for a seamless look.
5. Trim: Use a sharp blade to trim along ceilings, baseboards, and around outlets. Change blades frequently for clean cuts.
6. Remove: Peel slowly from a top corner at a low angle. If needed, gently warm with a hair dryer to ease removal.

Care Instructions

• Wipe with a soft, damp cloth; use mild soap only when necessary.
• Dry immediately; avoid abrasives, bleach, or solvent cleaners.
• For bathrooms, ensure good ventilation and avoid direct, constant water contact.

Note: Metallic effects are part of the printed artwork and are not metallic foil.