Gilded Filigree Bloom

Elevate your space with Gilded Filigree Bloom, a refined removable wallpaper that layers delicate filigree lines over soft botanical blooms. The design brings a warm, gallery-worthy glow to living rooms, bedrooms, entryways, and home offices—perfect for a statement wall or a full-room refresh.

Made without PVC and printed with eco-friendly, water-based inks, this wallpaper delivers premium color and superb detail while keeping indoor air quality in mind.

Key Features

• Removable and renter-friendly: Designed to go up smoothly and come down cleanly from most properly painted, smooth walls.
• Roll size: Each roll is 24 inches wide; choose your length up to 120 inches to fit your wall height.
• Seamless look: Precision-cut panels align for a continuous, elegant pattern across your wall.
• Eco-conscious: PVC-free substrate printed with low-odor, water-based inks.
• Versatile style: Balanced florals and filigree add sophisticated texture to classic, modern, or eclectic decor.
• Where it works best: Smooth, clean, dry, non-textured walls painted with eggshell, satin, or semi-gloss finishes.

Installation Guidance

1. Prep the surface: Walls must be smooth, clean, and fully cured (wait at least 30 days after painting). Wipe away dust and let dry completely.
2. Plan your layout: Measure your wall width. Divide by 24 inches to determine how many rolls you’ll need; round up to the next whole roll. Add extra length for trimming at the top and bottom.
3. Create a plumb line: Use a level to mark a straight vertical line where your first panel will go. This ensures perfect alignment.
4. Apply the first panel: Starting at the top, peel a small section of backing and adhere the panel, smoothing as you go. Continue peeling and smoothing downward using a felt squeegee or soft cloth. Do not stretch the material.
5. Match and continue: Butt edges gently (do not overlap) and align the pattern from one panel to the next. Smooth out air bubbles by pushing them to the nearest edge.
6. Trim and finish: Use a sharp utility knife and straightedge to trim excess at ceilings, baseboards, and around outlets. Replace blades frequently for clean cuts.
7. Removal: To remove, slowly peel from a top corner at a 180° angle. If needed, warm the material slightly with a hairdryer on low to ease release.

Note: Not recommended for textured walls, high-humidity areas with poor ventilation, or surfaces with flaking paint, primer-only finishes, or stain-resistant paints. Always test a small area first.

Care Instructions

• Dust regularly with a dry microfiber cloth.
• Spot clean with a damp, soft cloth and mild, water-based soap if needed.
• Avoid abrasives, bleach, and solvent cleaners.
• Blot spills promptly; do not saturate seams with water.