Gilded River on Matte Noir

Bring modern drama to your space with Gilded River on Matte Noir, a removable wallpaper designed to flow across your walls like a luminous, gold-toned current on a deep black backdrop. Printed with crisp, artful detail, it creates a striking accent wall or a sophisticated full-room look—without the commitment of traditional wallpaper.

All of our wallpapers are PVC-free and printed with eco-friendly, water-based inks for a low-odor, home-safe finish.

Key Features

• Removable and renter-friendly: Installs cleanly and removes without damage when taken down as directed.
• Eco-conscious: PVC-free material printed with water-based inks.
• Roll size: 24 inches wide; select heights up to 120 inches for a custom fit.
• Smooth, matte finish: Reduces glare and enhances the gold-toned design.
• Repositionable during install: Align patterns with confidence before final smoothing.
• Ideal surfaces: Smooth, clean, dry, and properly primed walls.

Sizing and Ordering

Each roll covers a 24-inch-wide vertical panel. Choose the height that matches your wall (up to 120 inches). For best results, measure wall height in several spots and allow a small margin for trimming.

• Order enough rolls to span your wall’s total width. Example: a 96-inch-wide wall typically needs 4 rolls (96 ÷ 24 = 4).
• Allow a little extra for pattern alignment and trimming around ceilings, baseboards, and outlets.

Installation Guidance

1. Prepare the wall: Ensure the surface is smooth, clean, dry, and fully cured (wait at least 30 days after painting). Avoid heavy textures and moisture-prone areas.
2. Plan your layout: Mark a straight, plumb line to guide your first panel.
3. Apply the first roll: Peel a few inches of backing, align the top, and smooth downward with a soft cloth or squeegee, peeling as you go.
4. Match and continue: Align the pattern and butt seams edge-to-edge—do not overlap. Smooth out bubbles from the center toward the edges.
5. Trim and finish: Use a sharp blade to trim at ceilings, baseboards, and edges. Firmly press seams once more.

Tip: If you need to reposition during install, gently lift and reapply. Work slowly to protect edges and maintain alignment.

Care and Maintenance

• Wipe with a soft, damp cloth; add a small amount of mild soap if needed.
• Avoid abrasives, harsh chemicals, and excessive scrubbing.
• Not recommended for rough or high-texture surfaces, or areas with direct water spray or persistent steam.