Welcome to our store

  • Home
  • Catalog
  • Collections

WClogo.jpg

  • Home
  • Catalog
  • Collections
Cart

WallCreatives

Gilded Summit Mist

Regular price $4.99
Regular price Sale price $4.99
Sold out

Gilded Summit Mist

Bring quiet drama to your space with Gilded Summit Mist, a removable wallpaper inspired by sunlit peaks and soft morning haze. Gentle gradients and warm, gold-kissed tones create a serene, modern backdrop that pairs beautifully with neutral palettes and natural textures—perfect for bedrooms, living rooms, nurseries, and entryways.

Key Features

  • Removable, renter-friendly design that peels off cleanly from most smooth, painted walls
  • 24-inch-wide rolls; choose your panel height up to 120 inches for floor-to-ceiling coverage
  • PVC-free material printed with eco-friendly, water-based inks
  • Matte, glare-reducing finish for a refined, artful look
  • Ideal for accent walls, full-room makeovers, and easy seasonal refreshes

Sizing & Coverage

Each roll is a 24-inch-wide vertical panel available in heights up to 120 inches. Measure your wall width and divide by 24 inches, then round up to the next whole panel. When in doubt, add one extra panel to account for cutting and alignment.

Installation Guidance

For best results, install on smooth, clean, fully cured painted walls (allow new paint to cure for at least 30 days). Avoid heavy texture, high humidity, and stain-resistant or low-stick paints.

  1. Prepare: Wipe the wall with a damp, lint-free cloth and let dry. Gather a level, measuring tape, pencil, sharp utility knife, and a soft smoothing tool.
  2. Plan: Mark a plumb line to keep the first panel perfectly straight.
  3. Apply: Peel 6–12 inches of backing from the top, align to the plumb line, and smooth downward, peeling more backing as you go. Work from the center outward to remove bubbles.
  4. Seams: Butt-join the next panel edge to edge for a seamless look. Reposition gently as needed.
  5. Finish: Trim excess at the ceiling, baseboard, and around outlets with a sharp blade.

Care & Removal

  • Wipe with a soft, damp cloth; a small amount of mild soap is fine. Avoid abrasives, bleach, and steam.
  • To remove, lift a corner and peel back slowly at a low angle. If any tack remains, warm the area slightly with a hair dryer and wipe clean.

Materials & Sustainability

  • PVC-free substrate for a safer, healthier home
  • Printed with eco-friendly, water-based inks
  • Low-odor application for comfortable indoor installation

Good to Know

  • Color may vary by screen; consider ordering a small section first to confirm scale and tone.
  • Best adhesion on clean, smooth, eggshell or satin paint finishes. Not recommended for heavy orange peel, knockdown, brick, or unsealed surfaces.

Quick links

  • Search
  • Catalog
  • Collections
Payment methods
  • Choosing a selection results in a full page refresh.