Golden Canyon Layered Stone

Bring the warmth and texture of a sunlit canyon into your home with this removable wallpaper. Golden Canyon Layered Stone features a dimensional stone look with soft, earthy gradients that add depth without overwhelming your space. Printed on a premium, PVC-free material and finished with eco-friendly, water-based inks, it’s a modern, renter-friendly way to refresh any room.

Key Features

• Removable and renter-friendly: Easy to apply, reposition, and remove cleanly from most painted walls.
• Premium, PVC-free substrate: A safer choice for homes and high-traffic spaces.
• Eco-conscious printing: Vibrant, low-odor, water-based inks.
• Refined stone effect: Matte finish reduces glare and enhances the layered stone look.
• Sized for real projects: Each roll is 24 inches wide and cut to your chosen height, up to 120 inches.
• Seam-aware design: Crisp edges for tight, clean seams.

Sizing and Coverage

Each roll is 24 inches wide with a custom height up to 120 inches (10 feet). Choose the height closest to your wall for a tailored fit.

• Measure your wall width and divide by 24 inches to estimate how many rolls you need. Always round up.
• Add at least 2 inches to your wall height for trimming at the ceiling and baseboard.
• Order all rolls for a project at the same time to ensure consistent color.

Installation Guidance

1. Prep: Install on smooth, clean, fully cured, latex-painted walls. Remove dust, fill holes, and wipe dry. Wait at least 30 days after painting.
2. Plan: Mark a plumb line with a level for your first panel. Dry-fit and confirm your layout.
3. Apply: Peel 6–8 inches of backing, align the top to your plumb line, and smooth from the center outward. Continue peeling and smoothing down the wall. Do not stretch.
4. Seams: Butt edges tightly for a nearly seamless look. Lift and reposition as needed to align the pattern.
5. Trim: Use a sharp utility knife and straightedge to trim excess at the ceiling, baseboard, and around outlets.
6. Set: Smooth once more and allow 24 hours at room temperature for the adhesive to set.

Care and Maintenance

• Wipe gently with a soft, damp cloth; use mild, non-abrasive soap if needed.
• Avoid bleach, solvents, abrasive pads, or excessive moisture.
• For removal, peel slowly at a low angle. Warming with a hair dryer on low can help release the adhesive.

Good to Know

• Best on smooth, non-textured walls. Not recommended on high-texture surfaces, gloss/slick finishes, or areas with heavy moisture or direct splashes.
• Color may vary slightly by device screen and print lot; order together for the closest match.
• Test a small area if you’re unsure about your wall paint or finish.