Hearthstone Red Brick Facade

Transform any room with the warmth and character of aged red brick—no masonry required. Hearthstone Red Brick Facade is a removable, renter-friendly wallpaper that delivers a timeless, hearth-warmed look for living rooms, entryways, offices, and accent walls.

All of our wallpapers are PVC-free and printed with eco-friendly, water-based inks for a beautiful finish you can feel good about.

Key Features

• Authentic red brick design with natural variation for a realistic, welcoming backdrop.
• Removable and repositionable for easy application and clean removal on most smooth, painted walls.
• Rolls are 24 inches wide; choose panel heights up to 120 inches to fit your space.
• Renter-friendly, mess-free upgrade for accent walls, backsplashes, headboards, and more.
• Printed to order with crisp detail and consistent pattern alignment.
• PVC-free substrate printed with eco-friendly, water-based inks.

Sizing and Coverage

Each roll (panel) measures 24 inches wide. To estimate quantity, measure your wall width and divide by 24 inches. Always round up and add a small margin for trimming.

Heights available up to 120 inches. Choose the panel height closest to your wall height; 1–3 inches of extra length is recommended for a clean, precise trim at ceilings and baseboards.

Installation Guidance

1. Prepare: Install on smooth, clean, dry, and fully cured paint (allow fresh paint to cure for at least 30 days). Wipe down walls and let dry.
2. Plan: Use a level to mark a plumb line for your first panel. Unroll and check panel order to keep the brick pattern aligned.
3. Apply: Starting at the top, align the first panel to your plumb line. Smooth outward with a felt squeegee or soft cloth, working down to push out air.
4. Seams: Butt edges gently and adjust as needed to maintain the brick alignment from panel to panel.
5. Trim: Use a sharp utility knife to trim excess at ceilings, baseboards, and around outlets.
6. Settle: Allow 24 hours for the adhesive to set before cleaning or exposing to humidity.

Care Instructions

• Dust regularly with a dry microfiber cloth.
• Spot clean with a lightly damp sponge and mild soap; avoid abrasives, bleach, and harsh chemicals.
• Do not soak. Blot gently and allow to air dry.
• To remove, lift a corner and slowly peel back at a low angle; warming the panel slightly can ease release.

Best Results

• Apply to smooth, primed, eggshell or satin-painted walls. Not recommended for heavy texture or places with constant steam.
• Measure carefully and order all panels needed at the same time for the closest color continuity.