Heritage Red Brick Wall

Bring character and warmth to your space with the Heritage Red Brick Wall removable wallpaper. Designed to capture the timeless texture of aged brick, this renter-friendly wallpaper installs cleanly, removes without damage when it’s time for a change, and is made with the planet in mind. All our wallpapers are PVC-free and printed with eco-friendly, water-based inks.

Key Features

• Authentic heritage red brick look with natural tonal variation.
• Removable design suitable for renters and long-term updates.
• PVC-free material printed with eco-friendly, water-based inks.
• Made to order in 24" wide rolls, up to 120" high to fit your space.
• Great for accent walls, bedrooms, living rooms, entryways, and home offices.
• Best on smooth, clean, properly painted walls.

Sizing and Coverage

Each roll is 24" wide by your selected height (up to 120"). Order one roll for every 24" of wall width.

• Example: A 120" (10 ft) wide wall typically needs 5 rolls.
• Measure your wall height at the tallest point. Choose a roll height that meets or slightly exceeds your wall height for clean trimming.
• For pattern alignment and installation wiggle room, consider ordering one extra roll for complex layouts or first-time installs.

Installation Guidance

1. Prepare the wall: Ensure the surface is smooth, clean, dry, and fully cured. Fresh paint should cure for at least 30 days.
2. Plan your layout: Mark a plumb line for the first panel and arrange panels left to right.
3. If self-adhesive: Peel 8–12" of backing, align the top, then smooth downward while removing backing gradually.
4. If paste-applied: Follow the paste instructions for your material (paste-the-wall or paste-the-paper), align, then smooth.
5. Butt seams edge-to-edge without overlapping. Use a smoothing tool to remove air and ensure a tight seam.
6. Trim at ceiling, baseboard, and around outlets with a sharp blade and straightedge. Change blades frequently.
7. Allow the installation to set before cleaning or placing furniture against the wall.

Care and Removal

• Wipe gently with a soft, damp cloth; use mild soap if needed. Avoid abrasives and harsh chemicals.
• Not recommended for high-moisture areas or direct water exposure.
• To remove, lift a top corner and peel back slowly at a low angle. Warm the panel slightly with a hair dryer if needed.
• Adhesion and removability can vary with wall prep and paint type; test a small area first.

Good to Know

• Printed to order; color may vary slightly between print runs. Order all rolls for a project together.
• Apply only to smooth, sound, non-textured surfaces. Stain-resistant or low-adhesion paints may reduce grip.
• Samples are recommended to check color and surface compatibility in your lighting.