Liquid Gold and Pearl Cascade

Bring flowing elegance to your space with Liquid Gold and Pearl Cascade, a removable wallpaper that layers warm gold tones and soft pearl shades in a serene, modern pattern. This renter-friendly wall covering adds instant artistry to living rooms, bedrooms, entryways, and home offices—without the commitment of permanent paste or paint.

Why you’ll love it

• Removable and renter-friendly: refresh your walls without damage when it’s time to move or change your style.
• Eco-conscious printing: PVC-free wallpaper printed with eco-friendly, water-based inks.
• Clean, refined look: designed for smooth, seamless panel alignment.
• Versatile style: complements contemporary, glam, and minimalist decor with a calm, cascading motif.
• Simple to order: rolls are 24 inches wide and available in heights up to 120 inches.

Sizing and coverage

Each roll covers 24 inches (61 cm) in width by your selected height (up to 120 inches / 305 cm). To estimate how many rolls you need, divide your wall width by 24 inches and round up.

• Example: A 10 ft (120 in) wide wall typically needs 5 rolls.
• Add 2–4 inches to your chosen height for trimming at ceiling and baseboard.
• Order all rolls at the same time to ensure consistent color across panels.

Installation guidance

1. Prep the wall: Apply to clean, dry, smooth, non-textured surfaces. Repair any holes, sand bumps, and remove dust. If recently painted, allow at least 30 days to fully cure.
2. Plan the layout: Unroll and identify panel order. Mark a straight vertical guideline using a level for your first panel.
3. Apply the first panel: Starting at the top, align to your guideline. Peel back a small portion of the backing and smooth downward with a squeegee or soft cloth, working from the center outward to remove air bubbles.
4. Add remaining panels: Align the pattern and butt seams edge-to-edge without stretching. Continue peeling the backing gradually as you smooth.
5. Trim and finish: Use a sharp blade to trim at ceilings, baseboards, and around outlets (power off, remove covers first).
6. Removal: Gently lift a corner and peel back slowly at a low angle. Any residue can be wiped away with mild soap and water.

Care and maintenance

• Wipe clean with a soft, damp cloth; for tougher spots, use mild soap and water.
• Avoid abrasive scrubbers, bleach, or strong solvents.
• Best in dry, well-ventilated areas. For bathrooms, ensure good ventilation and avoid direct water contact.

Materials and sustainability

• PVC-free substrate for a safer, more sustainable wall covering.
• Printed with eco-friendly, water-based inks for low-odor, vibrant detail.

Good to know

• Apply only to smooth, properly primed or painted walls; heavily textured or dusty surfaces may affect adhesion.
• Color may vary slightly between screens and print runs—order extra for future touch-ups.
• Let panels rest flat at room temperature for 24 hours before installation if delivered in cold conditions.