Luminous Horizon Wave

Bring calm, coastal energy to your space with Luminous Horizon Wave — a modern, removable wallpaper featuring softly flowing wave forms and a radiant horizon effect. Designed for renters and refreshers alike, this peel-and-stick wall covering goes up cleanly and removes without damage on most properly painted walls.

Key Features

• Removable and renter-friendly: reposition during install and peel off cleanly on most smooth, painted surfaces
• PVC-free material printed with eco-friendly, water-based inks
• Matte, low-glare finish enhances the artwork and reduces reflections
• Panels are 24 inches wide and available in heights up to 120 inches
• Seam design supports precise alignment for a continuous wave pattern
• Ideal for accent walls, entryways, bedrooms, studios, and creative workspaces

Sizing and Coverage

Each panel is 24 inches (2 ft) wide. Choose a panel height that meets or slightly exceeds your wall height (up to 120 inches).

• Measure your wall width in inches, divide by 24, then round up to the next whole panel.
• Add 2–4 inches in height for trimming at the ceiling and baseboard.
• We recommend ordering an extra panel if your wall width is near a rounding threshold or if you plan to wrap around corners.

Installation Guidance

1. Prepare the surface: Walls must be smooth, clean, fully dry, and cured. Wait at least 30 days after painting. Avoid fresh paint, primers with stain blockers, or slick/low-surface-energy coatings.
2. Clean the wall with mild soap and water; let it dry completely. Remove dust and switch plate covers.
3. Plan your layout: Use a level to mark a plumb line where your first panel edge will go.
4. Start at the top: Peel back a small section of the liner, align the top of the panel to the ceiling line, and adhere lightly.
5. Smooth as you go: Working downward, peel more liner while smoothing with a felt squeegee or soft cloth to remove bubbles.
6. Align the next panel: Butt seams or slightly overlap as desired, matching the wave pattern. Continue panel by panel.
7. Trim excess at ceiling, baseboards, and around outlets with a sharp utility knife. Replace covers and admire your refreshed space.

Surface and Room Suitability

• Best on: Smooth, painted drywall (eggshell, satin, or semi-gloss), primed wood, and other non-textured surfaces.
• Not recommended on: Textured walls, brick, unpainted drywall, high-humidity or steam-prone areas, or surfaces with dust, grease, or silicone-based paints.
• Always test a small area first to confirm adhesion and clean removal for your specific surface.

Care Instructions

• Wipe gently with a soft, damp cloth. For tougher spots, use mild soap and water.
• Avoid abrasive tools, harsh chemicals, and excessive moisture.
• Protect from direct, prolonged water contact and heavy abrasion.

Thoughtfully made without PVC and printed using water-based inks, Luminous Horizon Wave offers a modern, eco-conscious way to transform your walls with tranquil, gallery-quality design.