Metropolis Ink Block Print

Bring an elevated, urban rhythm to your space with the Metropolis Ink Block Print. This removable wallpaper delivers the graphic charm of hand-pressed blocks in a clean, modern repeat—perfect for feature walls, hallways, and creative home offices. All our wallpapers are PVC-free and printed with eco-friendly, water-based inks for a low-odor, planet-conscious finish.

Key Features

• Removable and renter-friendly: Peels away cleanly from properly prepared walls.
• PVC-free substrate: Made without vinyl.
• Eco-conscious print: Water-based inks with rich detail and minimal odor.
• Roll dimensions: 24 inches wide; choose heights up to 120 inches to fit your wall.
• Seamless look: Printed for side-by-side alignment to create a continuous pattern.
• Best on smooth walls: Ideal for clean, dry, primed, and painted surfaces.

Sizing & Coverage

Each roll is 24 in W by your selected height (up to 120 in). To estimate how many rolls you need:

1. Measure the total width of your wall in inches.
2. Divide by 24 to get the number of rolls across. Round up to the next whole roll.
3. Allow a little extra for trimming and alignment at edges and around obstacles.

Example: A 120 in wide wall typically needs 5 rolls (120 ÷ 24 = 5).

Installation Guidance

1. Prepare the wall: Ensure it is smooth, clean, dry, and fully cured. If freshly painted, allow at least 3–4 weeks to cure.
2. Plan your layout: Unroll and check panels in order. Mark a plumb line to keep your first roll perfectly vertical.
3. Apply the first roll: Align to your plumb line. Smooth from the center outward with a wallpaper tool to remove air bubbles.
4. Match and continue: Align the pattern edge-to-edge and install additional rolls side by side.
5. Trim excess: Use a sharp utility knife along the ceiling, baseboard, and openings.
6. Set and inspect: Wipe gently with a soft, dry cloth to ensure good contact at seams.

Removal: Lift a top corner and slowly peel down at a 180° angle. Remove steadily to help minimize paint lift on properly prepared surfaces.

Care & Maintenance

• Dust with a dry microfiber cloth or wipe gently with a damp cloth.
• For marks, use mild soap and water; avoid harsh chemicals, bleach, or abrasives.
• Blot splashes promptly. Ensure rooms like bathrooms are well ventilated.

Good to Know

• For best results, apply to smooth, non-textured, primed and painted walls.
• Not recommended on textured surfaces, unsealed surfaces, or peeling paint.
• Color may vary slightly between print batches; order enough for your project at one time.

Sustainably made, PVC-free, and printed with water-based inks—Metropolis Ink Block Print makes a bold statement that’s kinder to your walls and the environment.