Modern Alpine Stone Ledge

Bring the cool elegance of mountain stonework to your space with this removable wallpaper. Modern Alpine Stone Ledge layers subtle, natural stone tones in a clean, linear silhouette—perfect for creating depth and texture in living rooms, entryways, and bedrooms without the mess of masonry.

Printed on PVC-free material with eco-friendly, water-based inks, this design delivers a refined, matte finish that’s beautiful, low-odor, and renter-friendly.

Key features

• Modern stone ledge pattern with realistic depth and soft, neutral hues
• Removable and repositionable on most smooth, painted surfaces
• Matte, glare-free finish for a sophisticated look
• PVC-free substrate printed with eco-friendly, water-based inks
• Rolls measure 24 inches wide; select heights up to 120 inches
• Great for accent walls, fireplace surrounds, hallways, and offices

Size and coverage

Each roll is 24 inches (61 cm) wide and available in heights up to 120 inches (305 cm) to fit standard and tall ceilings.

• Measure your wall width and divide by 24 inches to estimate how many rolls you need.
• Add a small margin for pattern alignment and trimming around corners or outlets.

Installation guidance

1. Prep: Apply to smooth, clean, fully cured, and dry painted walls. Wipe away dust and let surfaces dry completely. Newly painted walls should cure for at least 30 days.
2. Plan: Start from a plumb vertical line. Unroll and pre-cut panels to your wall height with 1–2 inches extra for trimming.
3. Apply: Align the first panel at the top, smooth downward with a squeegee or soft cloth, and work from the center outward to remove air bubbles.
4. Align: Overlap or butt seams per the print alignment; adjust gently to match the stone pattern.
5. Trim: Use a sharp utility knife along ceilings, baseboards, and around fixtures.
6. Tips: Install in moderate temperatures on non-textured walls. Not recommended for high-texture surfaces, brick, or areas with heavy moisture.

Care

• Dust regularly with a soft, dry cloth.
• Spot clean with a lightly damp, non-abrasive cloth and mild soap if needed.
• Avoid harsh chemicals, bleach, and abrasive scrubbers.
• To remove, lift a corner and peel back slowly at a 45-degree angle.

Note: Colors may vary slightly by screen. For best results, order enough rolls for your project in one batch to ensure a consistent print run.