Obsidian Gold Fracture

Elevate your space with Obsidian Gold Fracture, a dramatic removable wallpaper featuring inky black depths traced with luminous gold-inspired lines. Designed for stylish, renter-friendly makeovers, this modern pattern adds instant architecture and mood to living rooms, bedrooms, entryways, and offices.

Key Features

• Removable, renter-friendly wallpaper for smooth, properly painted walls
• Rolls/panels measure 24 inches wide and up to 120 inches high
• PVC-free material printed with eco-friendly, water-based inks
• Low-odor, high-clarity print with rich blacks and gold-toned detailing
• Clean removal from properly prepared, non-textured surfaces

How to Order

• Each panel covers 24 inches in width. Calculate panels needed by dividing your wall width (inches) by 24 and rounding up.
• Select a panel height equal to (or slightly taller than) your wall height, up to 120 inches, to allow for trimming.

Installation Guidance

1. Ensure walls are smooth, dry, and fully cured (fresh paint should cure at least 30 days).
2. Clean the surface with mild soap and water; let dry completely. Avoid primers or paints with added stain blockers, Teflon, or silicone.
3. Plan your layout. Use a level to mark a plumb line for the first panel.
4. Starting at the top, align the first panel to the plumb line and smooth downward, pressing out air with a squeegee or soft cloth.
5. Install subsequent panels edge-to-edge, aligning the pattern. Work slowly and smooth as you go.
6. Trim excess at ceilings, baseboards, and around outlets with a sharp utility knife.

Care Instructions

• Wipe with a soft, damp cloth; use mild soap if needed. Do not use bleach or abrasive cleaners.
• Avoid heavy moisture and direct water exposure; not recommended for textured walls, brick, or surfaces with poor paint adhesion.
• If unsure about your surface, test a small area first.

Sustainable by design: PVC-free substrate and printed with eco-friendly, water-based inks for a beautiful, low-odor finish you can feel good about.