Oxidized Starship Hull Mural

Bring a bold, sci‑fi edge to your space with a mural that captures the weathered beauty of a starship’s hull—oxidized panels, riveted seams, and a softly worn patina that adds depth and dimension to any room.

This removable wallpaper is PVC-free and printed with eco-friendly, water-based inks for a cleaner indoor environment. Each roll is 24 inches wide and made to your selected height (up to 120 inches) for a tailored fit.

Key Features

• Removable wallpaper designed for easy updates and renter-friendly refreshes.
• PVC-free material printed with eco-conscious, water-based inks.
• Matte, low-glare finish with crisp, high-resolution detail.
• Panels are 24 inches wide for simple measuring, ordering, and alignment.
• Works best on smooth, properly painted walls free of dust and texture.

Sizes and Coverage

Roll width: 24 inches. Select your panel height up to 120 inches to match your wall.

How many panels do you need? Divide your wall width by 24 inches. For example, a 120-inch (10 ft) wall typically requires 5 panels.

Care Instructions

• Wipe gently with a soft, damp cloth as needed.
• Avoid harsh chemicals, bleach, and abrasive scrubbers.
• Not recommended for high-moisture areas with direct water exposure.

Installation Guidance

1. Ensure walls are smooth, fully dry, and free of dust or grease. Allow newly painted walls to cure completely before installing.
2. Measure and draw a level vertical guideline for your first 24-inch panel.
3. Dry-fit the panel to confirm height and pattern orientation.
4. Apply the first panel carefully from top to bottom, smoothing as you go to remove air pockets.
5. Butt subsequent panels edge-to-edge, aligning the design across seams.
6. Trim excess at ceilings, baseboards, and outlets with a sharp utility knife and straightedge.
7. For removal, lift a corner and peel away slowly at a low angle.

Transform your room into a cinematic backdrop—industrial, atmospheric, and unmistakably modern.