Playful Metropolis Grid View

Bring modern energy to your space with Playful Metropolis Grid View, a removable wallpaper that layers clean, city-inspired lines into a fresh, playful grid. Designed for easy updates and renter-friendly refreshes, it’s PVC-free and printed with eco-friendly, water-based inks for a beautiful, responsible finish.

Key Features

• Removable, renter-friendly design that peels away cleanly from most painted walls
• PVC-free material printed with eco-friendly, water-based inks
• Seamless, edge-to-edge look when panels are aligned
• Repositionable during installation for precise pattern matching
• Rolls are 24 inches wide with selectable heights up to 120 inches
• Ideal for accent walls, nurseries, playrooms, entryways, and home offices
• Best on smooth, clean, properly primed or painted surfaces

Sizing & Coverage

Each roll is a single panel measuring 24 inches wide. Choose a panel height up to 120 inches to match your wall height. For a professional fit, plan for 1–2 inches of extra length to trim at the ceiling and baseboard.

1. Measure your wall width in inches.
2. Divide by 24 to determine how many panels you need.
3. Round up to the next whole number to ensure full coverage.

Example: A 120-inch-wide wall needs 5 panels (120 ÷ 24 = 5).

Installation Guidance

1. Unroll panels and let them relax flat for 24 hours.
2. Ensure the wall is smooth, clean, dry, and fully cured (wait at least 30 days after fresh paint).
3. Mark a plumb line to keep the first panel perfectly vertical.
4. Starting from the top, align the first panel to the plumb line. Peel a small portion of the backing at a time and smooth downward with a squeegee or soft cloth.
5. Butt subsequent panels edge-to-edge, aligning the grid for a seamless look.
6. Trim excess at ceilings, baseboards, and around outlets with a sharp blade.
7. If needed, gently lift and reposition to remove bubbles or adjust alignment.

Note: Adhesion and removability may vary by paint type and wall texture. Highly textured or porous surfaces are not recommended.

Care & Removal

• Wipe gently with a soft, damp cloth; a mild soap solution can be used for spot cleaning.
• Avoid harsh chemicals, abrasives, steam, and excessive moisture.
• To remove, peel slowly from a top corner at a low angle. Clean any residue with warm, soapy water if needed.
• Always test a small, inconspicuous area first to confirm surface compatibility.

Materials & Safety

• PVC-free substrate
• Printed with eco-friendly, water-based inks
• Low-odor and designed for indoor residential use