Raw Architectural Concrete Panels

Bring the modern, industrial look of poured concrete to your space—no dust, no demo. Raw Architectural Concrete Panels is a removable wallpaper that recreates the depth, tonal variation, and subtle seams of raw concrete for a refined, minimalist statement in living rooms, bedrooms, entryways, and home offices.

PVC-free and printed with eco-friendly, water-based inks, this wallpaper delivers a realistic concrete effect with low odor and a matte, camera-friendly finish.

Key Features

Removable and renter-friendly: Easy to install and peel off cleanly from most properly painted walls.
Eco-conscious: PVC-free material printed with water-based inks.
Premium look: High-resolution concrete texture adds depth and character to modern, minimalist, and industrial interiors.
Panel format: Rolls are 24 inches wide with selectable heights up to 120 inches for floor-to-ceiling coverage.
Made to order: Printed on demand to reduce waste and ensure a consistent, freshly produced finish.
Low glare: Soft matte surface helps conceal minor wall imperfections and photographs beautifully.

Sizing and Coverage

Each roll is 24 inches wide. Choose a height up to 120 inches to fit your wall.

Measure your wall width in inches and divide by 24; round up to the next whole number for the panel count.
Select a panel height at least 1–2 inches taller than your wall to allow for trimming at the ceiling and baseboard.
Example: A 120-inch wide wall typically needs 5 panels (5 × 24").

Installation Guidance

Ensure the surface is smooth, clean, dry, and fully cured (paint should cure for at least 30 days).
Mark a plumb vertical guideline 24 inches from your starting edge for a perfectly straight first panel.
Starting at the top, peel back 6–12 inches of the liner and align the panel to your plumb line.
Smooth downward with a felt squeegee or soft cloth, working from the center out to remove air.
Continue peeling and smoothing in sections. Avoid stretching the material.
Hang subsequent panels edge-to-edge (or with a slight overlap if needed) to match the concrete design.
Trim excess at the ceiling, baseboard, and around outlets with a sharp blade.

Care and Maintenance

Wipe gently with a damp microfiber cloth; use mild soap if needed. Avoid abrasives and harsh chemicals.
Not recommended for high-moisture areas with direct water contact.
To remove, peel slowly at a low angle. If needed, warm with a hair dryer to ease release.
Best on smooth, properly primed and painted walls. Avoid heavy texture, dusty surfaces, or fresh paint.

Good to Know

Color may vary slightly by batch and screen; order all panels for a wall at the same time.
Allow slight trimming tolerance. Test a sample if your walls have unique paints or primers.
Low-odor, low-VOC print process using water-based inks; PVC-free material for a safer home environment.