Reclaimed Red Brick Charm

Bring the warmth of vintage masonry to your space—without mortar or mess. Reclaimed Red Brick Charm is a removable wallpaper designed to create a realistic brick feature wall in hours. Each roll is 24 inches wide with selectable heights up to 120 inches, making it easy to fit most rooms. Every print is PVC-free and powered by eco-friendly, water-based inks for a low-odor, home-safe finish.

Key Features

• Authentic, timeworn red brick look with a soft matte finish
• Removable and renter-friendly; repositionable during installation
• PVC-free material printed with eco-friendly, water-based inks
• Edge-to-edge alignment for a seamless, continuous pattern
• Low glare for photo-ready walls and cozy, natural texture
• Ideal for accent walls, entryways, bedrooms, studios, and cafes

Size & Coverage

Each roll measures 24 inches wide with a selectable height up to 120 inches. Order the number of rolls needed to span your wall’s total width.

• Coverage per roll = 24 inches (2 ft) x your chosen height
• Plan for 10% extra to allow for trimming and pattern alignment

Surface & Preparation

• Apply to smooth, clean, dry, and primed walls (eggshell, satin, or semi-gloss finishes recommended)
• Allow fresh paint to cure for at least 30 days before installation
• Not recommended on textured walls, unpainted drywall, high-humidity areas, or over stain-resistant/low-VOC paints without testing
• Wipe walls with a lint-free cloth to remove dust prior to installation

Installation Guidance

1. Tools: measuring tape, level, pencil, utility knife, smoothing tool/squeegee, microfiber cloth.
2. Measure your wall and mark a straight vertical guide using a level.
3. Starting at the top, peel 6–12 inches of the backing liner and align the first panel to your guide.
4. Press and smooth downward in small sections, peeling more liner as you go. Work from the center outward to release air.
5. Install the next panel edge-to-edge, matching the brick pattern for a seamless look.
6. Trim around ceilings, baseboards, and outlets with a sharp blade.
7. To remove, lift a corner and slowly peel back at a low angle; use gentle heat from a hair dryer if needed.

Care & Maintenance

• Wipe with a soft, damp cloth; add a drop of mild soap if necessary
• Avoid abrasives, bleach, and strong solvents
• Do not saturate seams or pressure-wash

Eco Commitment

All our wallpapers are PVC-free and printed with eco-friendly, water-based inks for a safer home and a lighter environmental footprint.