Refined Grove Vertical Wood Slats

Give your walls the tailored warmth of a handcrafted slat feature with the convenience of removable wallpaper. Refined Grove Vertical Wood Slats brings realistic wood-grain detailing and crisp vertical lines that visually heighten any space—perfect for living rooms, bedrooms, offices, and rental-friendly refreshes.

Made with a premium, PVC-free material and printed using eco-friendly, water-based inks, this design offers a low-odor, family-friendly finish without compromising on style.

Size and Coverage

• Panel width: 24 inches
• Selectable height: up to 120 inches per panel
• Coverage example: a 24 x 120 inch panel covers up to approximately 20 sq ft (coverage varies by selected height)
• Pattern designed to align edge-to-edge for a continuous vertical slat look

Key Features

• Removable and repositionable for easy updates and clean removal
• PVC-free material with a smooth, matte finish
• Printed with eco-friendly, water-based inks
• Realistic wood-grain detailing for a custom millwork look
• Renter-friendly: no damage to most properly painted walls
• Helps rooms feel taller with elegant vertical lines

Surface Compatibility

• Best on smooth, clean, dry, non-textured, and properly primed/painted walls
• Allow fresh paint to cure for at least 30 days before installation
• Avoid application on high-texture surfaces, unfinished drywall, or surfaces painted with stain-resistant or “washable” paints that may reduce adhesion
• We recommend ordering a sample to test color and adhesion in your lighting and on your paint

Installation Guidance

1. Prepare the wall: Wipe down with a lightly damp, lint-free cloth and let dry completely.
2. Plan your layout: Mark a plumb vertical guideline for the first panel.
3. Apply: Peel 6–12 inches of the backing from the top, align to the guideline, and smooth from the center outward.
4. Continue: Gradually peel and smooth down the panel, removing air bubbles with a squeegee or soft cloth.
5. Match edges: Butt the next panel edge-to-edge, aligning the slat pattern for a continuous look.
6. Finish: Trim excess at ceiling, baseboards, and around outlets with a sharp blade.
7. Removal: Slowly peel from a top corner at a low angle. Adhesive is designed to come away cleanly from most properly painted walls.

Care Instructions

• Wipe with a soft, damp cloth; use mild soap if needed
• Avoid abrasive scrubbers, bleach, or ammonia-based cleaners
• Suitable for well-ventilated powder rooms; avoid direct water spray and prolonged high humidity
• For longevity, avoid placing directly above high-heat sources

Good to Know

• Color may vary by screen; order a sample for the most accurate preview
• Intended for vertical installation to achieve the wood-slat effect