Sculpted Concrete Caverns

Transform your space with the depth and calm of hand-shaped stone. Sculpted Concrete Caverns is a removable wallpaper that brings the refined look of sculpted concrete to any room—without the weight, mess, or commitment of real masonry.

Printed on a premium, PVC-free material with eco-friendly, water-based inks, this design is made for healthier homes and striking, modern style.

Key Features

• Elevated concrete-cavern motif that adds dimension and architectural character.
• Removable design for a renter-friendly refresh on smooth, properly painted walls.
• Rolls are 24 inches wide and available up to 120 inches high to fit most walls.
• PVC-free substrate and eco-friendly, water-based inks with low odor.
• Edge-to-edge alignment for a continuous, seamless look across rolls.

How to Measure and Order

1. Measure your wall width and height. For height, measure in several spots and use the tallest measurement.
2. Each roll covers 24 inches of wall width. Divide your total wall width (in inches) by 24 and round up to find the number of rolls.
3. Select a roll height that meets or slightly exceeds your wall height (up to 120 inches).

Installation Guidance

1. Prepare the surface: Walls should be smooth, clean, dry, and fully cured (wait at least 30 days after fresh paint).
2. Gather tools: tape measure, level, sharp utility knife, smoothing tool, and a step stool or ladder.
3. Mark a plumb line where the first roll will hang to ensure perfectly straight installation.
4. Align the first roll to the plumb line, then smooth from top to bottom, working outward to remove air bubbles.
5. Hang subsequent rolls edge-to-edge without overlapping, matching the design as you go.
6. Trim excess at the ceiling, baseboards, and around outlets using a sharp blade.
7. To remove, slowly peel away from the wall at a low angle. Proceed carefully to protect the paint surface.

Care Instructions

• Dust regularly or wipe gently with a soft, damp cloth.
• Use mild soap only if needed; avoid bleach, solvents, and abrasive cleaners.
• Do not scrub. Avoid direct water spray and prolonged high humidity.
• Avoid installing on textured walls, high-moisture areas, or surfaces painted within the last 30 days.