Sculpted Concrete Labyrinth

Bring the architectural drama of carved concrete into your space—without the weight or permanence. Sculpted Concrete Labyrinth is a removable wallpaper that blends modern geometry with subtle tonal depth, creating a sophisticated, urban-inspired statement on any smooth wall.

Key Features

• Removable wallpaper: Renter-friendly, damage-free removal from most smooth, properly painted walls.
• PVC-free material: Safe for homes and workspaces.
• Eco-conscious print: Produced with eco-friendly, water-based inks.
• Made to fit: Rolls are 24 inches wide and available in heights up to 120 inches.
• Clean, modern look: A concrete-inspired labyrinth pattern adds depth without overwhelming your space.
• Easy to install: Peel-and-stick application—no paste, no mess.

What’s Included

• Removable peel-and-stick wallpaper roll(s): 24 in W x your selected height (up to 120 in)
• Simple installation guide

Sizing and Ordering Tips

• Measure the full height of your wall and select the roll height that meets or slightly exceeds it.
• Measure the wall width and divide by 24 inches to estimate the number of panels needed.
• Order an extra panel when possible to allow for trimming and alignment.

Installation Guidance

1. Prepare: Ensure walls are smooth, clean, dry, and fully cured (allow at least 30 days after painting). Remove dust and switch plates.
2. Plan: Use a level to mark a plumb line where your first panel will go.
3. Peel: Start at the top of the first panel, peel back 8–12 inches of the liner.
4. Apply: Align the top edge and the plumb line, then smooth downward with a felt squeegee or soft cloth, peeling the liner as you go.
5. Join: Align the next panel edge-to-edge (do not overlap) and repeat.
6. Finish: Trim excess at the ceiling, baseboards, and around outlets with a sharp utility knife.

Tools recommended: Tape measure, level, pencil, utility knife with sharp blades, felt squeegee or soft cloth, step stool/ladder.

Care Instructions

• Wipe clean with a soft, damp cloth.
• Use mild soap if needed; avoid abrasive cleaners and scrubbing pads.
• To remove, slowly peel from a top corner at a low angle. If needed, slightly warm the panel with a hair dryer to ease release on delicate paint finishes.

Good to Know

• Best on smooth, non-textured, properly primed and painted walls (eggshell or satin finishes recommended).
• Not recommended on high-texture surfaces, unpainted drywall, or areas with persistent moisture.
• Adhesion can be affected by low-energy paints, residue, or dust—always test a small area first.