Sculpted Timber Weave Mural

Bring the warmth of hand-worked wood to your walls. The Sculpted Timber Weave Mural captures the depth and rhythm of interlaced timber, creating a calm, organic texture that enriches living rooms, bedrooms, entryways, and creative spaces.

This removable wallpaper is PVC-free and printed with eco-friendly, water-based inks for a beautiful, low-impact finish. Each roll is 24 inches wide and available in heights up to 120 inches to fit your wall.

Key Features

• Removable wallpaper mural designed for easy home refreshes
• PVC-free material printed with eco-friendly, water-based inks
• Roll size: 24 in W; select your height up to 120 in
• Edge-to-edge panel alignment for a seamless look
• Ideal for smooth, primed interior walls

Sizing & Coverage

Each roll covers 24 inches of wall width by your chosen height (up to 120 inches).

• Measure your total wall width in inches and divide by 24 to estimate the number of rolls. Round up to the next whole number.
• Allow extra for trimming and pattern alignment, especially on out-of-plumb walls.

Surface Preparation

• Install on smooth, clean, dry, and fully cured painted walls (avoid fresh paint until fully cured).
• Wipe away dust and grease; repair and sand bumps or texture for best results.
• Avoid heavy texture, high humidity, or areas with direct water contact.
• Use a level to mark a straight plumb line for your first panel.

Installation Guidance

1. Unroll panels and let them relax flat for 10–20 minutes.
2. Mark a plumb line where the first panel will go.
3. Apply the first panel from top to bottom, aligning to the plumb line.
4. Smooth from the center outward with a wallpaper tool, removing bubbles as you go.
5. Install subsequent panels edge-to-edge, carefully aligning the timber weave pattern.
6. Trim excess at ceilings, baseboards, and around outlets with a sharp blade.
7. Work slowly with two people for the cleanest seams and alignment.

Care Instructions

• Wipe with a soft, damp cloth; use mild soap if needed.
• Avoid abrasive scrubbers, harsh chemicals, or solvents.
• Not recommended for high-moisture or steam-heavy areas.
• Test any cleaner on a small, inconspicuous area first.

Removal

To remove, start at a corner and peel back slowly at a low angle. If a panel resists, warm it gently or work slowly to reduce wall stress. If you installed with paste, lightly mist with warm water to help release before peeling.

Helpful Notes

• Order all panels for a project at the same time for the best color consistency.
• Colors may vary slightly from screen to screen; a sample is recommended.
• For newly painted walls, wait until paint is fully cured before installation.