Sun-Kissed Terracotta Brick Wall

Bring the warmth of sunlit clay into your space with this realistic terracotta brick removable wallpaper. Rich, sun-kissed tones and natural brick detail create a cozy, lived-in backdrop for rustic, industrial, or Mediterranean-inspired interiors—without the weight or permanence of real masonry.

Printed on premium, PVC-free material with eco-friendly, water-based inks, this wallpaper is a renter-friendly way to transform walls with style and sustainability.

Key Features

Removable, renter-friendly design for easy updates and clean removal
PVC-free substrate printed with eco-friendly, water-based inks
True-to-life terracotta brick pattern for depth and warmth
Rolls are 24 inches wide; select heights up to 120 inches
Panels align for a seamless look across your wall
Great for living rooms, entryways, kitchens, studios, and accent walls

What’s Included

Removable wallpaper roll(s): 24 in W x your chosen height (up to 120 in)
Continuous pattern designed to match across adjacent panels

How Much to Order

Measure your wall width in inches and divide by 24. Round up to the next whole number to determine how many panels (rolls) you need.
Select a panel height equal to or slightly taller than your wall; allow 2–4 inches for trimming at top and bottom.

Installation Guidance

Prep: Install on smooth, clean, dry walls. For freshly painted surfaces, allow paint to cure for at least 30 days.
Plan: Mark a straight, plumb line to start your first panel.
Apply: Hang panel by panel, aligning the pattern. Smooth from top to bottom and center outward to remove air bubbles.
Finish: Butt seams gently without stretching the material. Trim excess at ceilings, baseboards, and around outlets with a sharp blade.
Reposition: If needed, gently lift and reapply to perfect alignment.

Care & Maintenance

Wipe clean with a soft, damp cloth; use mild soap if necessary.
Avoid harsh chemicals, bleach, or abrasive scrubbers.
Use in dry, well-ventilated areas; avoid direct, repeated water exposure.
To remove, peel slowly at a low angle. Warm slightly with a hair dryer if the adhesive feels firm.