Tapet Emerald Citadel

Bring rich, modern elegance to your space with Tapet Emerald Citadel. This removable wallpaper layers deep emerald tones for a calm, sophisticated backdrop that suits living rooms, bedrooms, offices, and entryways. Designed for easy updates without damage, it’s PVC-free and printed with eco-friendly, water-based inks.

Key Features

• Removable and renter-friendly: Installs cleanly and removes without wall damage when used on properly prepared surfaces.
• Eco-conscious: PVC-free material printed with water-based inks.
• Sized for simple planning: Rolls are 24 inches wide and available in heights up to 120 inches.
• Seam-smart design: Panels are made to align for a continuous look.
• Smooth, matte finish: Reduces glare for a refined, premium appearance.
• Low mess: No harsh odors; ideal for home decor refreshes.

Sizing & Coverage

Each panel is 24 inches (61 cm) wide. Choose a height that matches your wall, up to 120 inches (305 cm).

• Measure the full width of your wall and divide by 24 inches to estimate how many panels you need; always round up.
• Add a small margin to height and width to allow for leveling and trimming.
• For multiple walls or larger rooms, measure each wall separately.

Installation Guidance

1. Prep the wall: Ensure the surface is smooth, clean, dry, and fully cured (fresh paint should cure for at least 30 days). Remove dust and wipe down with a mild, damp cloth. Avoid highly textured or non-sealed surfaces.
2. Plan your layout: Mark a plumb line to keep the first panel perfectly vertical.
3. Apply the first panel: Starting at the top, peel back a small section of the liner, align to your plumb line, and smooth downward with a squeegee or soft cloth, working out bubbles as you go.
4. Continue panel by panel: Butt seams or follow the printed overlap/align guides if present. Trim excess along ceilings, baseboards, and around outlets with a sharp blade.
5. Removal: Gently peel from a top corner, pulling back slowly at a 180° angle. Warm the panel slightly if needed to ease release.

Care Instructions

• Wipe clean with a soft, damp cloth. Avoid abrasive pads and harsh chemicals.
• Suitable for low- to moderate-humidity rooms; avoid direct water exposure and heavy steam.
• Do not scrub. Test a small area first if using any cleaner.

Good to Know

• For the best results, install on smooth, primed, and fully cured painted walls.
• Not recommended for textured, freshly painted, or unprimed surfaces.
• Colors can appear slightly different in person due to screen settings and lighting.